AST Partslist


Part No.	Description	No. per Unit	Total No.	Comments	Dlvrd?	Spare	Com	Drawings

	BASE WELDMENT			3000 pounds	**		ORNL	ast-01-a01,a02
1-001	Base plate (of telescope base)	1	1	ORNL Y-12	*			ast-01-p01
1-002	Inner cylinder	1	1		*			ast-01-p02
1-003	Vertical stiffener	12	12		*			ast-01-p04
1-004	Top plate	1	1		*			ast-01-p03
1-005	Outer cylinder	1	1		*			ast-01-p03
1-006	Jack bracket	6	6		*			ast-01-p04
1-007	Jack shelf	3	3		*			ast-01-p04
1-008	Auxillary shelf	1	1		*			ast-01-p05
1-009	Raceway (THK45+60/1000R)	1	1		*			ast-01-p05
1-010	Mounting blocks for azimuth drive wheel	9	9		*			ast-01-p04
1-011	Bearing pad (see dwg. AST-02-A02)	3	3	Separate assembly	*			ast-02-a02
1-012	1/2-13x2 skt head cap screws (stainless)	20	20	To attach 1-009	*
1-013	1/2-in flat washer (stainless)	20	20	To attach 1-009	*
1-014	1/2 lock washer (plated)	20	20	To attach 1-009	*
1-015	1/2-13 nut (stainless)	20	20	To attach 1-009	*
1-016	1-inch nut (stainless)	3	3	To attach base to pier	*
1-017	1-in flat washer (stainless)	3	3	To attach base to pier	*
1-018	Levelling jack	3	3	To level base on pier	*
1-019a	Shim for jack, 3/8-inch	1	1	Aluminum plate, 5.5x3.62x3/8	*		MEK	ast-01-p19
1-019b	Shim for jack, 1/8-inch	4	4	Aluminum plate, 5.5x3.62x1/8	*		MEK	ast-01-p19
	BASE DOOR			J.W. McDougal	**		McD	ast-01-a04
1-020	Top/Botton Frame (base door)	2	2		*			ast-01-p06
1-021	Vertical Frame	2	2		*			ast-01-p06
1-022	Vertical Duct Support	2	2		*			ast-01-p06
1-023	Horizontal Duct Support	2	2		*			ast-01-p06
1-024	Door Plate	1	1		*			ast-01-p07
1-025	Fiber-glass insulation for top of base	1	1	Seal between base and slewing ring	*
1-030	Lifting eye (CL-25-HR)	3	3	Provided by TSU	*
1-031	3/8-16x1.75 skt hd cap screw (stainless)	6	6	To attach 1-030	*
1-032	3/8-in flat washer (stainless)	6	6	To attach 1-030	*
1-033	3/8-in lock washer (stainless)	6	6	To attach 1-030	*
1-034	3/8-16 nut (stainless)	6	6	To attach 1-030	*
1-035	Air cylinder and base (with screws)	3	3	Provided by TSU	*
1-036	Foot for air cylinder (CL-12-LF-S, modified)	3	3	Provided by TSU	*
1-037	3/8-16x1 hex head cap screws (ss)	12	12	To attach air cylinders	*
1-038	3/8NPT(m)-3/8in barb fitting	3	3	For air cylinders	*
1-039	3/8NPT(m)-1/4NPT(f) coupling	3	3	For air cylinders	*
1-040	1/4NPT plug	3	3	For air cylinders	*
	DISTRIB. FOR PNEU. CYLINDERS				**
1-041	3/8IDx30in pneumatic tubing	3	3		*
1-042	1/2-in ID hose clamps	6	6		*
1-043	1/4NPT(m)x3/8in barb fitting	3	3		*
1-044	1/4NPT(f)x1/4NPT(m) valve	3	3		*
1-045	3/8NPT(f) to 1/4NPT(f) manifold	1	1		*
1-046	3/8NPT(m)-1/4NPT(f) coupling	1	1	Same as 1-039	*
1-047	1/4NPT(m)-indust quick-connect (male)	1	1		*
	BASE SKIRT			xx pounds	**		Ham	ast-01-a05,a06
1-050	Base Skirt Frame (base skirt)	1	1	Hamilton will weld frame	*
1-050a	Inner collar	1	1		*			ast-01-p0?
1-050b	Rib (stiffener plate)	12	12	1/8-inch aluminum sheet (TSU)	*			ast-01-p10
1-050c	Spoke (stiffener version)	24	24	3/4x3/4x1/8 angle (TSU)	*			ast-01-p10
1-050d	Spoke (joint version)	8	8	1.25x1/8 alum strip	*
1-050e	Upright (joint plate)	8	8	1.25x1/8 alum strip	*
1-050f	Spoke (tractor attachment-clearing and side)	6	6	1.25x1/8 alum strip	*
1-050g	Upright (motor-cover plate)	2	2	1.25x1/8 alum strip	*
1-050h	Motor-Cover Attachment Strip	2	2	1.25x1/8 alum strip	*
1-050i	Top plate (cut into multiple segments)	1	1	Sheet aluminum	*
1-050j	Skirt Plate (cut into four segments)	1	1	Sheet aluminum	*
1-050k	Bearing surface for brush seals	1	1	Sheet aluminum, cut and fit	*
1-050l	Rivets (1/8-in aluminum, blind)	200	200	To help attach plates to frame	*
1-050m	Upper and Lower (Outer) Rings	2	2	3/4x3/4x1/8 square tubing	*			ast-01-p09
1-050n	Joint Cover (top)	4	4		*			ast-01-p10
1-050o	Joint Cover (vert)	4	4		*			ast-01-p10
1-050p	Joint Guide	4	4	Goes under 1-050m	*			ast-01-p10
1-050q	3/16x3-in rubber seal for inner collar	1	1	NR&G; cut to shape and glued on	*
1-051	1/4-20x3/4 button-hd hex-sckt screws	30	30	screws to attach skirt to fork	*
1-052	Attachment Adapter	4	4	To clear drive attachment	*			ast-01-p10
1053	1/4-20x1/2 sckt-hd cap screw (ss)	2	8	Attach 1052 to drive attachment	*
1054	10-32x0.5 button-hd hex-sckt cap screw (ss)	2	8	Attach shroud to 1052	*
1-058	Catches for skirt	8	8	Moore Indust Hardware	*
1-059	10-32x1/2 button-hd hex-sckt screws (ss)	16	16	To attach catches (1-058)	*
1-060	Base for Skirt (fixed)	1	1		*			ast-01-p09
1-061	10-32x1/2 button-hd hex-sckt screws (ss)	50	50	screws to attach 1-060 to base	*
1-062	Skirt Brush Seal	1	1		*			ast-01-a07
1-063	10-32x1/2 socket-head cap screw (ss)	25	25	screws to attach brush seal (1-062)	*
	DRIVE SHROUD			4.75 pounds each with filter	**		JAE
1-070	Drive Shroud cut out	1	2	0.05-in aluminum sheet	*			ast-01-p11
1-071	Attachment angle	3	6	1/16-in aluminum angle	*			ast-01-p11
1-072	Air-filter holder	1	2	0.05-in aluminum sheet	*
1-072	10-32x0.5 button-hd hex-sckt cap screw (ss)	6	12	Attach shroud&mot cov to base skirt	*
1-073	10-32 sheet-metal nuts	4	8	Put in skirt for drv shrd&mot cov	*
	MOTOR COVER			2.5 pounds each	**		JAE
1-075	Upright-Top cutout of motor cover	1	2	0.05-in aluminum sheet	*			ast-01-p12
1-076	Base of Motor Cover	1	2	0.05-in aluminum sheet	*			ast-01-p12
1-077	Air-line nipple for motor cover	1	2	Use 4-in to 3-in adapter cut off	*
1-078	3-inch air line (2-foot)	1	2		*
1-079	Clamp for air line	2	4		*
1-080	3-inch nipple for fork	1	2	Make out of 3-in plastic toilet adapter	*
1-081	10-32x1/2 button-hd hex-sckt cap screw (ss)	2	4	Attach 1-080 to fork	*
	AZIMUTH BRAKE PARTS				**			ast-01-a08
1-090	Azimuth hard stop	2	2	Same as 10-096	*			ast-01-p14
1-091	1/2-13x3.5 hex-head cap screw	4	8	To attach 1-090	*
1-092	1/2-in flat washer	4	8	To attach 1-090	*
1-093	1/2-in lock washer	4	8	To attach 1-090	*
1-094	1/2-13 nut	4	8	To attach 1-090	*
1-095	Shock-absorber anchor	2	2	ORNL-Y12	*			ast-01-p14
1-096	Shock absorber	2	2	Ace Controls A1-1/8x6-C	*
1-097	3/8-16x2.75 socket-head cap screw	6	12	To attach 1-095	*
1-098	3/8-in flat washer	6	12	To attach 1-095	N/A
1-099	3/8-in lock washer	6	12	To attach 1-095	*
1-100	3/8-in nut	6	12	To attach 1-095	*
1-101	Brake slider, top plate	1	2	ORNL-Y12	**			ast-01-p13
1-102	Brake slider, inner spacer	1	2		*			ast-01-p13
1-103	Brake slider, outer spacer	1	2		*			ast-01-p13
1-104	Brake slider, inner grip	1	2		*			ast-01-p13
1-105	Brake slider, outer grip	1	2		*			ast-01-p13
1-106	1/2-20x1.5 socket head cap screw	8	16	To hold slider together	*
1-107	1/2-20 jam nut	8	16	ditto	*
1-108	3/4-16x1.5 hex head cap screw	1	2	Attach brake to slider	*
1-109	3/4-16 jam nut	1	2	ditto	*
1-110	3/4-10x4 hex head cap screw (Grade 8)	1	2	Attach brake to telescope base	*
1-111	3/4-in flat washer	1	2	ditto	*
1-112	3/4-in lock washer	1	2	ditto	*
1-113	3/4-10 nut	1	2	ditto	*
	ZERO-POINT DETECTORS			(one of these is for altitude-see 9-050)	**		MEK	ast-01-a09
1-120	Base for Magnet (Sony PG-1)	1	3		*
1-121	Magnet (Sony PG-104)	1	3		*	1
1-122	Magenswitch detector body (Sony)	1	2	Sony SET-15-1 (5 Volt model)	*	1
1-123	10-32x3/8 socket-hd cap screw (ss)	2	4	To attach magneswitch to slide	*
1-124	Magneswitch mount body	1	2	Krebs	*			ast-01-p15
1-125	Slide keeper	1	2	Krebs	*			ast-01-p15
1-126	6-32x3/8 hex-sckt cap screws (ss)	4	8		*
1-127	Dovetail slide	1	2	Krebs	*			ast-01-p15
1-128	10-32x0.5 button-hd hex-sckt cap screw	2	4	To lock down slide	*
1-129a	no. 10 washers for 123 and 128	4	8		*
1-129b	no. 10 lock washers for 123 and 128	4	8		*
1-130	Adjusting bar	1	2	Krebs	*			ast-01-p15
1-131	6-32x3/8 socket-head cap screws (ss)	2	4		*
1-132	6-32x1 socket-head cap screw (ss)	2	4		*
1-133	1/4-20x1 hex head cap screw (stainless)	3	6		*
1-134	8-32x3/8 socket-head cap screw (ss)	2	6	Attach 1-120 to drive wheel	*
	AZIMUTH LIMIT SWITCH				**
1-140	Azimuth limit switch	1	2	Grainger 2XC12 (Unimax 2HBA190-5)	*	3
1-141	Azimuth-limit-switch adapter	1	2	TSU	*		JAE
1-142	6-32x1 socket-head cap screw (ss)	2	4	screws for limit switches	*
1-143	no. 6 lock washer	2	4		*
1-144	no. 6 flat washer	2	4		*
1-145	8-32x1/2 socket-head cap screw (ss)	2	4	screws for bases for limit switches	*
1-146	no. 8 lock washer	2	4		*
	BASE LIGHTS&PLUG				**		JAE
1-150	Junction box	1	1	TSU	*
1-151	Cover plate for switch & plug	1	1		*
1-152	Switch	1	1		*
1-153	Plug	1	1		*
1-154	1/2-inch flexible conduit	2	2		*
1-155	Wires	2	2		*
1-156	Junction box for lights	2	2		*
1-157	Fixtures for lights	1	1	Set with two screw receptacles	*
1-158	Light bulbs	2	2		*
	AZIMUTH ABSOLUTE ENCODER				**			ast-01-a10,a11
1-160	Central hub (drive wheel)	1	1	Mark Wells	*		MW	ast-01-p16
1-161	8-32x1/2 sckt-hd cap screws (ss)	12	12	Attach 1-160 to 2-001	*
1-162	Encoder drive wheel	1	1	Mark Wells	*		MW	ast-01-p17
1-163	Hub for 1-162	1	1	Berg PH2-5 (p. 542)	*
1-164	Axle for 1-162	1	1	Berg S1-32 (p. 559)	*
1-165	Lower axle spacer (D3/8x0.031)	1	1	Berg SS2-43 (p. 484)	*
1-166	Upper axle spacer (D3/8x0.062)	1	1	Berg SS2-44 (p. 484)	*
1-167	Standoff (lower span to telescope)	2	2	Mark Wells	*		MW	ast-01-p18
1-168	1/4-20x2 sckt-hd cap screw (ss)	4	4	Attach to telescope	*
1-169	Lower span	1	1	Mark Wells	*		MW	ast-01-p18
1-170	Intermediate standoff	2	2	Mark Wells	*		MW	ast-01-p18
1-171	Upper span	1	1	Mark Wells	*		MW	ast-01-p18
1-172	Encoder standoff	2	2	Mark Wells	*		MW	ast-01-p18
1-173	10-32x1/2 sckt-hd cap screws (ss)	16	16	Attach spans to standoffs	*
1-174	Encoder flexure	1	1	Mark Wells	*		MW	ast-01-p18
1-175	10-32 sheet-metal nut	4	4	Press into flexure to attach encoder	*
1-176a	Servo clamp	4	4		*		MW
1-176b	6-32x1/2 sckt-hd cap screws (ss)	4	4	Attach encoder to flexure	*
1-176c	6-32 lock nut	4	4	ditto	*
1-176d	10-32x1/2 sckt-hd cap screws (ss)	4	4		*
1-177	Bearing adapter	2	2	Mark Wells	*		MW	ast-01-p18
1-178	Bearing (3/8x7/8 ball bearing)	2	2	Berg B13-11 (p. 572)	*
1-179a	6-32x1/2 sckt-hd cap screws (ss)	3	6	To attach bearing adapter to spans	*
1-179b	6-32 lock nut	3	6	ditto	*
1-180	Encoder (Teledyne Gurley)	1	1	A25S-B155-012A-06E-1AN	*	1
1-181	10-32x1/2 sckt-hd cap screws (ss)	4	4	Attach encoder to flexure	*
1-182	Flexible coupling (bet axle&encoder)	1	1	Berg CO40S-4 (p. 501)	*
1-183	Set screw for coupling	2	2		*
1-184	Wire-rope assembly	1	1	Mark Wells; mat from Berg	*			ast-01-p20?
1-185	10-32x1/2 socket-head cap screw (ss)	1	1	Attach 1-182 to wheel	*
1-186	tensioning spring	1	1	0.5ODx1.62FL; Century C-165	*
1-187	Tensioning cam/link for 1-184	1	1		N/A			ast-01-p??
1-188	10-32x0.5 sckt-hd cap screw	1	1	Attach 1-184 to wheel	*
1-189	Mount for electronics box	1	2	Plastic; use DIN mount from CyMOD	*		JAE
1-190	Strap for elescronics mount	1	2	0.05-in alum cut to size	*		JAE
1-191	8-32x3/8 sckt-hd cap screw (ss)	2	4	For 1-190	*
1-192	7-inch DIN rail	1	2	Hold CyMOD and encoder electron.	*
1-193	8-32x3/8 sckt-hd cap screw (ss)	2	2	Attach DIN rail to telescope	*
1-200	Handle (grab iron for moving inside tel.)	1	1		*
1-201	1/4-20x3/4 sckt-hd cap screw (stainless)	2	2	Attach 1-200	*
					…
					…
	AZIMUTH CENTER PIVOT			82 pounds, assembled, without flange	**		Schm	ast-02-a01
2-001	Hub (azimuth central pivot)	1	1	Schmiede Corp.	*			ast-02-p01
2-002	Kaydon KF110XP4K	1	1		*	1
2-003	Flexure	1	1		*			ast-02-p02
2-004	Lower Seal Holder	1	1		*			ast-02-p04
2-005	Lower Seal - 36 inches of 3/8x3/8 felt	1	1	NR&G	*	1
2-006	Upper Seal Holder	1	1		*			ast-02-p03
2-007	Upper Seal - 36.5 inches of 3/8x3/8 felt	1	1	NR&G	*	1
2-008	Mating flange for hub	1	1	(21 pounds)	*			ast-02-p05
2-009	3/8-16x4.5 skt head cap screw (high str)	12	12	Att hub to fork (50 lb-ft)	*
2-010	5/16-18x1.5 cap screw (stainless)	24	24	Att seal holders to flexure	*
2-011	1/4-28 grease fitting	1	1	See AST-02-P3	*
2-012	5/16-18x1.25 cap screw (stainless)	24	24	Att flange to flexure (25 lb-ft)	*
2-013	3/8-16x1.5 hex head cap screw (stainless)	12	12	Att flange to base (30 lb-ft)	*
	AZIMUTH OIL PAD BEARINGS			(22 pounds each with fittings)	**		ORNL	ast-02-a02
2-020	Oil Pad	1	3		*			ast-02-p06--p09
2-021	M12-1.5x10 Plug	3	9		*	15
2-022	Orifice (cut in M12-1.5x10 plug)	4	12	Plug - provided by TSU	*	?
2-023	Tube/Orifice Compensator	1	3	Provided by TSU	NA
2-024a	Fitting (Aeroquip 202702-10-10S)	1	3	Provided by TSU	*
2-024b	Rt angle fitting (Aeroquip 2071-10-10S)	1	3	Provided by TSU	*
2-025a	Oil-Return Fitting (Aero. FF1854T-10-10S)	2	6	Provided by TSU	*
2-025b	Return-line extender	2	6	Use 1-in plastic barb modified by TSU	*
2-026	Return-Channel Seal	1	3	Provided by TSU	*	1
2-027	Long Seal Retainer	2	6		*			ast-02-p10
2-028	Short Seal Retainer	2	6		*			ast-02-p10
2-029	Bearing Adapter	1	3		*			ast-02-p10
2-030	Pivot Bearing (ELGES)	1	3	GE 20 AW provided by TSU	*
2-031	Pivot Bearing Retainer	1	3		*			ast-02-p10
2-032	1/4-20x3/4 socket-head cap screw (ss)	4	4	For 2-031	*
2-033	1/4-20x3/4 socket-head cap screw (ss)	4	4	For 2-029	*
2-034	Levelling Screw - Acme 1.5 - 4	1	3	Prov. by TSU - Modif. Reqd (ORNL)	*			ast-02-p11
2-035	Bronze Nut for Levelling Screw	1	3	Prov. by TSU - Modif. Reqd (ORNL)	*			ast-02-p11
2-036	Flange for Bronze Nut	1	3	Prov. by TSU - Modif. Reqd (ORNL)	*
2-037	3/8-16x0.5 set screw (stainless)	1	3	To lock parts 35 & 36	*
2-038	3/8-16x0.5 set screw (stainless)	1	3	To Retain Levelling Screw	*
2-039	Jam Nut (stainless)	1	3	Prov. by TSU - Modif. Reqd	*
2-040	8-32x3/8 flat-hd socket machine screw (ss)	28	84	To attach 27 & 28	*
2-041	Oil - pad keeper	2	6	See drawing AST - 02 - P11 (ORNL)	N/A			ast-02-p11
2-042	1/4-20x0.75 (for 41)	2	6		N/A
2-043	3/8-16x1 hex head cap screw (ss)	4	12	To attach 36	*
2-044	Oil overflow trough	3	3	Make of high-density plastic	*		MEK	ast-02-p10
2-045	Fitting for overflow pan/collector (custom)	1	3	5/8-16 with barb for 5/8-in tubing	*		MEK
2-046	Tube and clamps for overflow system	1	3	5/8-in ID plastic tubing and conctrs	*
2-047a	Collector for overflow system	1	1	PVC box from Home Depot	*		JAE
2-047b	Switch for overflow collector	1	1		*
2-047c	Float for overflow switch	1	1	Small parts Y-MFX-32	*
2-047d	Bracket for overflow switch	1	1		*		JAE
2-047e	Electrical pump for overflow system	1	1	Grainger 2P401	*
2-047f	Fitting for overflow system	1	1	1-inx1/2-in tee	*
2-048	Oil collection pan	3	3	Galvanized sheet metal	*
2-049	10-32x1/2 button-hd hex-sockt screws	5	15	Attach 2-048 to slewing ring	*
2-050	5/8-in OD hydraulic line from oil pump	1	1		*
2-051	Tee Fitting (Aeroquip 2033 - 1010S)	2	2		*
2-052	5/8-in OD tubing, bent to R33.75	1	1	Appx. 140 in, cut into 6 pieces	*
2-053	Straight coupling (Aeroquip 2027 - 1010S)	2	2		*
2-054	1/2-in ID x 18 - in hose	3	3		*
2-055	RT Angle fitting (Aeroquip 2071 - 1010S)	1	1		*
2-060	1-in ID hydraulic line to oil pump/reservoir	1	1		*
2-061	Tee Fitting (Aeroquip 2033-16-16S)	1	1		*
2-062	1-in OD tubing, bent to R25.1	1	1	Appx. 100 in, cut into 3 pieces	*
2-063	Right Angle coupling	2	2	Aeroquip 2033 -1616S	*
2-064	1-in ID hose (appx. 12 in, cut to size)	6	6		*
2-065	Tee fitting (Aeroquip 2031-1616S)	4	4		*
2-066	Nipple for 1-in tube	6	6		*
2-067	Step fitting (Aeroquip 221501-1610S)	1	1		*
2-068	Straight coupling (Aeroquip 2071-1010S)	1	1		*
2-069	1/2-in ID x 55-inch hydraulic hose	2	2	Two required for tests, one to oper	*
2-070	Tee fitting (Aeroquip 203102-1010S)	1	1		*
2-071	Right-angle coupling (Aero 2071-1010S)	1	1		*
2-072	Straight coupling (Aeroquip 2027-1006S)	2	2		*
2-073	Return oil pump (10 in**3/s)	1	1	Bosch 0510325011 gear pump;R&B	*
2-074	5/8-inch OD tubing	1	1	Return to tank	*
2-075	Step fitting (Aeroquip 2215-1210S)	1	1		*
2-080	Tee fitting (Aeroquip 2033-1010S)	1	1	Regulator body; modified by J.A.E.	*
2-081	Thru fitting for 2-082 (Aero FF1852-0606S)	1	1	Regulator body; modified by J.A.E.	*
2-082	0.375-in ODx15 in steel rod	1	1	Regulator shaft	*
2-083	5/8-inch OD tubing	1	1	Regulator outer tube	*
2-084	Right-angle coupling (Aero 2071-1010S)	2	2		*
2-085	1/2-in ID x 18-inch hydraulic hose	1	1		*
2-086	5/8-inch OD tubing	1	1		*
2-087	Compression nut (Aeroquip FC1851-10S)	1	1	Plus fittings	*
2-088	Thru fitting (Aeroquip FF2031T-1012S)	1	1	NPT-to-ORS for tank entry	*
2-089	Straight coupling (Aeroquip 2215-1008S)	1	1	Adapter for strainer	*
2-090	Input screen (MB diesel tank strainer)	1	1	Modified by TSU	*
2-095	Tee coupling (Aero 2031-0810S)	2	2	NPT thread for gauges	*
2-096	Step adapter 1/2 NPT to 1/4 NPT	2	2		*
2-097	Electrical pres sensr (MSP-300-500-Y-1-Z)	1	1	Measurement Specialties Inc.	*	2
2-098	0-600 psi pressure gauge	1	1	Amtek P550L	*
2-099	5/8-inch OD tubing	1	1		*
2-100	Flow regulator valve (Bosch)	1	1	Robbins&Bohr	*
2-101	10-micron filter	1	1	F/A FMT100A0812S12V50; R&B	*	1
2-102	Pickup filter (in tank)	1	1	LHA SHE-10-1-100-RV2; R&B	*
2-103	Water filter	1	1	Zinga LE10-AZ; Robbins&Bohr	*	1
2-104	Return filter (60-micron)	1	1	F/A TTF120; Robbins&Bohr	*	1
2-105	Overflow valve (pressure regulator)	1	1	Gresen MRB-005-FFAD-06C; R&B	*	1
2-106	Input pressure gauge (0-1000 psi)	1	1	LHA PGL-A-63-N-B-1000S; R&B	*	1
2-107	Input oil pump (10 in**3/s)	1	1	Bosch 0510325011 gear pump;R&B	*
					…
					…
	FORK WELDMENT			3150 pounds	**		ORNL	ast-03-a1,a02
3-001	Base plate (telescope fork)	1	1	ORNL Y-12	*			ast-03-p01
3-002	Outer cylinder	1	1		*			ast-03-p02
3-003	Inner cylinder	1	1		*			ast-03-p03
3-004	Lateral base stiffener	2	2		*			ast-03-p06
3-005	Outer tyne plate	4	4		*			ast-03-p04
3-006	Inner tyne plate	2	2		*			ast-03-p04
3-007	Base top plate	1	1		*			ast-03-p10
3-008	Lower tyne stiffener	4	4		*			ast-03-p06
3-009	Upper tyne stiffener	4	4		*			ast-03-p06
3-010	Tyne top plate	2	2		*			ast-03-p01
3-011	Middle cylinder seg 1	4	4		*			ast-03-p03
3-012	Middle cylinder seg 2	4	4		*			ast-03-p03
3-013	Lower inner plate	2	2		*			ast-03-p07
3-014	Upper inner plate	2	2		*			ast-03-p07
3-015	Upper outer plate	2	2		*			ast-03-p08
3-016	Lower outer plate	4	4		*			ast-03-p08
3-017	Alt drive mount	1	1		*			ast-03-p05
3-018	Stay-Bar attachment	1	1		*			ast-03-p05
3-019	Azimuth drive mount	2	2		*			ast-03-p05
3-020	Azimuth bearing surf	1	1		*			ast-03-p09
3-021	5/16-18x1.5 sckt-head cap screw	50	50	Attach 20 to 1 (prov by ORNL)	*
3-030	Fork cover plate	4	4	J.W. McDougal	*			ast-03-p11
3-031	10-32x0.5 button head sckt cap screw (ss)	6	30	For 3-030 and 3-032	*
3-032	Inner cover plate for feed-through	1	1	0.1-inch aluminum plate	*			ast-03-p14
3-033	Feed-through for umbilical	2	2	3-inch plastic toilet connection, mod	*			ast-03-p15
3-034	Clamp for umbilical	2	2		*
3-035	Air filter	1	4		*	?
3-036	Air-Filter Frame	1	4	TSU	*			ast-03-a03
3-037	Air-Filter Standoff	1	4	TSU, 6x7x1/4 plastic (mat ordered)	*			ast-03-p13
3-038	10-32x3/4 button-hd sckt cap screw (ss)	4	16	For 3-036	*
3-040	Inner brush seal	1	1	Seeleze-modification reqd.	*
3-041	Outer brush seal	1	1	Seeleze-modification reqd.	*
3-042	10-32x0.5 button-hd sckt cap screw (ss)	60	60	To attach 3-040,41	*
3-050	Azimuth alignment jig	3	3	Make of wood	*		JAE	ast-03-p12
					…
					…
	ALTITUDE AXLES				**			ast-04-a03,p07
4-050	Altitude axle	2	2	Schmiede Corp. (45 pounds each)	*		Schm	ast-04-p08
4-051	Altitude-axle adapter	2	2	ORNL Y-12	*		ORNL
4-052	5/8-11x2.5 skt hd cap screw (Grade 5)	24	24	Torque to 200 lb-ft	*
4-060	Pillow Block & Bearing ([F]SAF22520)	2	2	Prov by TSU (Allied Bearing)	*			ast-04-a03
4-061	3/4-11x2.5 hex head bolt (stainless)	8	8	Attach pillow block to fork	*
4-062	3/4-in flat washer (stainless)	16	16	Torque to 250 lb-ft	*
4-063	3/4-in lock washer (stainless)	8	8		*
4-064	3/4-11 nut (stainless)	8	8		*
4-065	Shims for pillow block (0.010 inches)	2	2	Mat. from Travers; apply in Arizona	*		JAE
4-070	Lateral Support for Pillow Block	4	4	CL - 125 - SAC	*			ast-04-a03
4-071	3/4-11x4 hex head bolt (stainless)	8	8		*
4-072	3/4-in flat washer (stainless)	8	8		*
4-073	3/4-in lock washer (stainless)	8	8		*
4-074	3/4-11 nut (stainless)	8	8		*
4-075	Locator for pillow block	4	4	TSU (from sketch)	*		JAE
4-076	1/2-13x1.5 socket-head cap screw	4	4	To attach 4-075 to fork	*
4-080	Eye for Lifting Fork (CL-2500-SHR-3)	4	4	Provided by TSU	*			ast-04-a03
4-081	1/2-13x4 hex head bolt (stainless)	4	4		*
4-082	1/2-in flat washer (stainless)	4	4		*
4-083	1/2-in lock washer (stainless)	4	4		*
4-084	1/2-13 nut (stainless)	4	4		*
	TILT ABSOLUTE ENCODER				…
4-090	Pulley for tilt axis	1	1	Berg 3MDF5S-70 (75 th; 3.7452pd)	*			ast-04-a04
4-091	Centering pin (3/8x1/2)	1	1	Use same mat as for 1-164	*		MW	ast-04-p10
4-092a	6-32x1/2 sckt-hd cap screw (ss)	3	3	Attach 4-090 to axle	*
4-092b	no. 6 flat washer	3	3	ditto	*
4-092c	no. 6 lock washer	3	3	ditto	*
4-093	Pulley for encoder	1	1	Berg 3MDF19S-35 (35 th; 1.7478pd)	*
4-094	Hub for pully	1	1	Berg PH4-63	*
4-095	Set screw	1	1		*
4-096	Timing belt	1	1	Berg 3CBF-100-E (100-th belt; 15.7 in)	*
4-097	Mount for absolute encoder	1	1		*		MW	ast-04-p10
4-098	Base for encoder mount	1	1		*		MW	ast-04-p09
4-099	1/4x3/8 shoulder screw	2	2	Attach 4-097 to 4-098	*	1
4-100	1/4-20x1/2sckt-hd cap screw (ss)	3	3	Secure mount to base	*
4-101	1/4-in flat washer	3	3	For 4-099	*
4-102	Absolute encoder	1	1	A25S-B155-012A-06E-1AN	*
4-103	Servo clamp	3	3	Attach enclder to mount	*		MW
4-104	8-32x3/8 sckt-hd cap screw (ss)	3	3	Secure edge clamp to mount	*
4-105	Base spacer	1	1	Make of 1/2-inch aluminum plate	*		JAE	no drawings
4-106	10-32x1/2 skt-head cap screw (stainless)	2	2	Attach to fork	*
4-107	Electronics mount	1	1	Same as parts 1-189--192	*
4-108	8-32 1.5-inch standoff	2	2	Mount 4-107 to fork	*
4-109	8-32x3/8 sckt-hd cap screw (ss)	2	2	ditto	*
					…
					…
	TUBE AND ACCESSORIES			Tube = 2360 pounds	**		surpl	ast-05-a01
5-050	Insert for central cone	1	1	Part number duplicared	*			ast-05-p10
5-051	Plug for axle attachment slot	2	2	Part number duplicared	*			ast-05-p18
	INSTRUMENT STAND			71 pounds	**		ORNL	ast-05-a07
5-003	Central Cylinder (tube-instrument stand)	1	1	ORNL Y-12	*			ast-05-p17
5-004	Upper Central Ring	1	1		*			ast-05-p17
5-005	Lower Central Ring	1	1		*			ast-05-p17
5-006	3/8-16x1.5 hex hd cap screw (ss)	12	12	To attach to cell	*
5-007	1/4-20x0.5 skt hd cap screw (ss)	12	12	To attach instrument head to stand	*
5-010	10-32x0.5 button-hd sckt cap screws (ss)	44	44	To attach covers, 5-011--5-016	*
	COVERS FOR PORTS				**		McD
5-011	Hard-point cover	2	2	J.W. McDougal	*			ast-05-p19
5-012	Outer-port cover	1	1		*			ast-05-p19
5-013	Inner Port Cover, 1	1	1		*			ast-05-p19
5-014	Inner Port Cover, 2	1	1		*			ast-05-p19
5-015	Back-Ring Port Cover	4	4	0.05-in aluminum sheet	*
5-016	Front-Ring Port Cover	4	4	1/8-inch aluminum sheet	*
	MIRROR-CELL BACK COVERS			18 pounds each	**		Ham	ast-05-a08
5-020	Outer frame (circle) - (back cover of cell)	2	2	Hamilton Mach.	*			ast-05-p21
5-021	Inner frame (cirlce)	2	2		*			ast-05-p21
5-022	Spoke	8	8		*			ast-05-p22
5-023	Frame Stiffener (1st form)	8	8		*			ast-05-p22
5-024	Frame Stiffener (2nd form)	8	8		*			ast-05-p22
5-025	Outer Block Spanner	4	4		*			ast-05-p22
5-026	Inner Block Spanner	4	4		*			ast-05-p22
5-027	Auxillary Inner Spanner	4	4		*			ast-05-p22
5-028	Cover Plate	2	2		*			ast-05-p21
5-029	Stiffener for Handle	4	4		*			ast-11-p08
5-030	Handles	4	4	Provided by TSU	*
5-031	1/4-20x1 socket-hd cap screw (stainless)	8	8	To attach handles	*
5-032	1/4-20 lock nut	8	8		*
5-033	Latches for back covers	12	24	TSU	*	12		ast-05-p31
5-034	1/4-20x2 sckt-hd cap screw (ss)	12	24	To attach latches	*
5-035	Attachment for 4-inch flex. Tube	4	4		*
5-036	6-foot section of flexible tubing	2	2		*
5-037	Clamps for flexible tubing	8	8		*
5-038	Right-angle fitting for flex tube	2	2		*
5-039	Tee for flex tube	2	2		*
5-040	Cover for instrument cone	1	1	TSU; 1/8-in alum plate	*
5-041	10-32x1/2 hex-sckt button-hd cap screws	6	6	For 5-040	*
	MIRROR-WASHING DAM						JAE
5-045	Collar for mirror	1	1	Sheet aluminum from shrouds	*			ast-05-p33
5-046	Rubber seal for collar	1	1	1/8-inch rubber (2x1/16x175 in)	*
5-047	Drain fitting for collar	1	1		*
5-048	Drain hose	1	1	1-in IDx2 ft	*
5-049	Fittings to lead drain out of tube	1	1	Plastic elbows; adapt at TSU	*
	INSTRUMENT HEAD			(Cheepie vers. delivered by Hamilton)	**		ORNL	ast-05-r18--r22
5-050	Base of instrument head				**
5-050	Base Ring	1	1	Parts for instrument head	*			ast-05-p23
5-051	Wall Cylinder	1	1	(ORNL Y-12)	*			ast-05-p23
5-052	Top Plate	1	1		*			ast-05-p23
5-053	External Stiffener	8	8		*			ast-05-p23
5-054	Internal Stiffener, Type 1	2	2		*			ast-05-p23
5-055	Internal Stiffener, Type 2	4	4		*			ast-05-p23
5-056	Cover Adapter Ring	1	1		*			ast-05-p24
5-057	Cover for instrument head				**		ORNL
5-057	Cover Wall Cylinder	1	1		*			ast-05-p24
5-058	Cover Top Plate	1	1		*			ast-05-p24
5-059a	Baffle Adapter Ring	1	1		*			ast-05-p24
5-059b	1/8-in stainless pop rivets	6	6	Assemble cover	*
5-060	Input Window (D1.5inx10mm)	1	1	Oriel 44960	*
5-061a	Window Adapter Ring	1	1	Krebs	*		MEK	ast-05-p25
5-061b	Window Retainer	1	1		*		MEK
5-061c	4-40x1/4 sckt-hd cap screws (ss)	3	3	Attach 5-061b to 5-061a	*
5-061d	O ring (ID1.5x1/16)	2	2		*
5-062	8-32x1/2 skt-head cap screw (stainless)	6	6	Attach window mount to cover	*
5-063	Linear Slide (Automation Gages VA-13)	1	1	Provided by TSU	*	1
5-064a	8-32x1/2 socket-head cap screw (ss)	4	4		*
5-064b	No. 8 flat washer	4	4		*
5-064c	No. 8 lock washer	4	4		*
5-064d	Alignment pins (5/32-inch)	2	2	To establish position of slide	*
5-065	Right-angle bracket (for guide mirror mount)	1	1	Krebs	*		MEK	ast-05-p29
5-066	8-32x1/2 socket-head cap screw (ss)	4	4		*
5-067	Guider Mirror	1	1	Monolithic aluminum (7075-T6)	*	2	MW	ast-05-p29
5-068	8-32x3/8 socket-head cap screw (ss)	4	4	attach 5-067	*
5-069	SMA-to-SMA adapter	3	3	Thor Labs ADASMA	*
5-070	Motor Bracket, Type 1	1	1	Bored for smaller HSI motor	*			ast-05-p25
5-071	8-32x1/2 socker-head cap screw (ss)	4	4	Atach motor bracket	*
5-072	no. 8 lock washer	2	2	ditto	*
5-073	Linear Stepper Motor (HSI 26349-12)	1	1	Provided by TSU	*	2
5-074	6-32x1/2 socket-head cap screw (ss)	2	6	Attach motor 5-073	*
5-075	no. 6 lock washer	2	6	ditto	*
5-076	4-40 lock nut	3	3	Attach shaft to long slide	*
5-077	Hard Stop	2	2	One bored for proximity switch	*		MEK	ast-05-p25
5-078	8-32x3/4 skt-head cap screw (stainless)	2	4	Attach hard stops	*
5-079	no. 8 lock washer	2	4	ditto	*
5-080	Proximity-switch holder for calib. slide	1	1		*		MEK	ast-05-p32
5-081	6-32x1/2 sckt-hd cap screw (ss)	1	1	Attach 5-080	*
5-082	1/8x3/8 dowel pin	3	3	Align 5-080, 5-102	*
5-083	Linear Slide (Automation Gages VA-11)	2	2	Provided by TSU; for 5-087,5-088	*	1
5-084a	8-32x1/2 socket-head cap screw (ss)	2	4	Attach 5-083	*
5-084b	No. 8 flat washer	2	4	ditto	*
5-084c	No. 8 lock washer	2	4	ditto	*
5-085	Motor Bracket, Type 2	2	2	To move 5-087,5-088	*		MEK	ast-05-p26
5-086	Linear Stepper Motor (HSI 4644X-12)	2	2	To move 5-087,5-088	*	2
5-087	Calibration-Feed Standoff	1	1	Krebs	*		MEK	ast-05-p26
5-088	Camera Standoff	1	1	Krebs	*		MEK	ast-05-p26
5-089	Camera-Slide Arm	1	1	Krebs	*		MEK	ast-05-p27
5-090	4-40x3/8 socket-head cap screw (ss)	2	2	Attach 5-089 to 5-088	*
5-091	Right-angle prism (10x10x10mm)	1	1	Ealing 24-3667/1; for calibration feed	*
5-092	Transfer lens (F25.0mm,D12.5mm)	1	1	Ealing 43-0769; for calibration feed	*
5-093	Plug for fiber-optic couler (for calib. Feed)	1	1	Thor Labs ADASMA;same as 5-069	*
5-094	4-40x1/8 set screw	1	1	For locking 5-093	*
5-095	Calibration-feed frame	1	1	Krebs	*		MEK	ast-05-p30
5-096	6-32x0.5 socket-head cap screws (ss)	2	2
5-097	2-56x1/4 socket-head mach screw (ss)	2	2	Attach 5-095 to 5-087	?
5-098	8-32x1/2 socket-head cap screw (ss)	4	4	Attach 5-087 to slide	*
5-099	8-32x3/8 socket-head cap screw (ss)	4	4	Attach 5-088 to slide	*
5-100	Field lens (F65.0mm,D25.0mm)	1	1	Meles Griot 01LAO083	*
5-101	Field-lens adapter	1	1	Krebs	*		MEK	ast-05-p27
5-102	Guider lens mounting fixture	1	1	Krebs	*		MEK	ast-05-p28
5-103	4-40 set screw (stainless)	1	1	To hold 5-101	*
5-104	10-32x0.75 socket-head cap screws (ss)	4	4	Attach 5-102 to base plate	*
5-105	no. 10 lock washer	4	4
5-106	Flat mirror (to fold beam)	1	1	Edmund Scientific CR30205	*
5-107	Mirror retainer (1/8-in mirror clip)	1	1	Home Depot	*	2
5-107a	6-32x1/2 sckt-hd cap screw (ss)	3	3	Retainer&alignment	?
5-107b	lock washer	1	1	mirror retainer	?
5-108	4-40x3/8 socket-head cap screw (ss)	2	2	Locate mirror	*
5-109a	Extension spring	1	1	Hold mirror in place	?
5-109b	4-40x3/8 sckt-hd cap screw (ss)	2	2	Retain 5-109a	*
5-110	Camera lens (F25.5 f/1.9 S-Coronar)	1	1	Rolyn 30.1120	*
5-111	Shim for camera lens	1	1		N/A
5-112	8-32 nylon-tipped set screws	2	2	Retain camera lens (see 7-055d)	*
5-120	Guide camera (Panasonic GP-MF602)	1	1		*	?
	TERMINATION FOR FIBERS TO SPECT
5-130	Central tube (.01&0.0 x6)	1	3	Small Parts	*
5-131	Guard tube (0.0 &0.033x2.5)	1	3	Small Parts	mat
5-132	SMA connector (750 um bore, modified)	1	3	Thor Labs 10770A	*	3
5-133	Guide ferrule, 1 (0.052&0.103x0.4)	1	3	need 4 more	2		MEK
5-134	Guide ferrule, 2 (0.035 &0.05x1)	1	3		mat
5-140	Alignment jig for fibers	1	1		*		MEK
5-141	SMA adapter for 5-140	1	1	Same as 5-069	*
5-145	Target for testing guider	1	1		*		MEK
	BAFFLE EXTENDER							ast-05-p34
5-150	Outer ring	2	2		des
5-151	Inner ring	2	2		des
5-152	Rubber diaphragm	1	1	1/16x6x40 rubber sheet	des
5-153	4-40x0.5 machine screw (ss)	24	24
5-154	4-40 nut	24	24
5-155	no. 4 washer	24	24
5-156	Extension spring	4	4
5-157	6-32x0.75 screw	4	4	Attach spring to housing
5-158	6-32 lock nut	4	4	ditto
5-159	Hook	4	4	Hook spring over strut
5-160	Clamp	2	2		??
5-161	screws	8	8	Attach clamp to extender & cover	?
					…
					…
	AXIAL SUPPORT LEVERS			12 pounds each, assembled	**		Ham	ast-06-a01
6-001	Base plate	1	36	Hamilton Machine	*			ast-06-p01
6-002	Uprights	2	72		*			ast-06-p01
6-003	Lever body	1	36		*			ast-06-p02
6-004	0.5-in threaded rod	1	36		*			ast-06-p03
6-005	Keeper	1	36		*			ast-06-p02
6-006	Lucas Flexural pivot (5012-400)	2	72	Supplied by TSU	*	14
6-007a	Force-transferring column	1	36		*		MEK	ast-06-p11
6-007b	1.125IDx0.125 O ring	1	36	Small Parts ORS-216	*	14
6-007c	Pivot foot - Carr Lane CL-6-LF-S (TSU)	1	36		N/A
6-008a	3/8-16x2 set screw (stainless)	1	36		*
6-008b	3/8-16x5 threaded rod (stainless--TSU)	1	36		N/A
6-009	10-lb counterweight	1	36	Provided by TSU	*			ast-06-p03
6-010a	1/2-13 nut (stainless)	1	36		*
6-010b	1/2-13 jam nut (stainless)	1	36		*
6-011	1/2-in washer (stainless)	2	72		*
6-012	1/4-20x1 - in cap screw (stainless)	8	288	Hamilton Machine	*
6-013	10-24x1/4 set screw (stainless)	4	144		*
6-014	10-24x0.75 sckt-hd cap screw (stainless)	2	72		*
6-015	1/2 -in lock washer	1	36		*
	AXIAL HARD POINTS				**		MEK	ast-06-a07
6-017	Invar puck (existing)	1	3		*
6-018	Stand - off (existing, to be modified)	1	3		*			ast-06-r01
6-019	Carr - Lane rest button CL-17-RB	1	3	Provided by TSU	*			ast-06-r01
6-019a	1/4-20x3/4 sckt-hd cap screw (ss)	3	9	Attach 6-018 to puck	*
6-020	Mounting attachments (to be modified)	1	3		*			ast-06-r02
6-021	Plunger CLR-210-TB	1	3	Provided by TSU	*			ast-06-r02
6-022	Threaded body CLR-210-TB (TSU)	1	3		*
6-023	Plug for plunger.	1	3		*		MEK	ast-06-r02
6-024	Adapter	1	3	Not used	N/A
6-025	Press spring Lee (LHL 625D03)	1	3	Not used	N/A
6-026	Graduated scale Winco 20MF66/B/MCRS	1	3	Not used	N/A
6-027	Spacer (obsolete)	1	3	Not used	N/A
6-028	Mounting flange CLR-202-TBA	1	3		*
6-029	Ball plunger Winco L04-4599 (TSU)	2	6		*
6-030	3/8-16x2.25 skt hd cap screw (stainless)	4	12	To attach hard-point holders	*
	LATERAL SUPPORT LEVERS			60 pounds each, assembled	**		Ham	ast-06-a02,a03
6-031	Side frame (1st form) - (lateral support)	2	8	Hamilton Machine	*			ast-06-p04
6-032	Side frame (2nd form)	2	4		*			ast-06-p04
6-033	Lever body	1	6		*			ast-06-p05
6-034	3/4-in threaded rod (stainless)	1	6		*			ast-06-p04
6-036	Lucas Flexural pivot (5024-400)	2	12	Supplied by TSU	*	2
6-037	Pivot foot - Carr Lane CL-6-LF-S (TSU)	1	3		*
6-038a	3/8-16x6 threaded rod (stainless-- TSU)	1	3	rod+foot len=6 in (side)&8 in (cen)	*
6-038b	Screw pull assembly	1	3	TSU-use surplus eyes	*	1	MEK
6-038c	Bushing, aluminum (3/8ID,5/8ODx1)	1	3		*		MEK	no drawings
6-039	50-lb counterweight (supplied by TSU)	1	6	Actually 53 to 54 pounds each	*			ast-06-p05
6-040	3/4-10 nut (stainless)	2	12		*
6-041	3/4-in washer (stainless)	2	12		*
6-042	3/8-16x1.5 hex hd cap screw (stainless)	4	24		*
6-043	1/4-20 set screw (stainless)	4	24		*
6-044	3/4-in lock washer (stainless)	2	12		*
6-045	Pull adapter for lateral support	3	3	Krebs	*
6-046a	3/8-16x1.25 Hex-hd cap screws (ss)	4	20	Attach frames to mirror cell	*
6-046b	3/8-16x2 hex-hd cap screws (ss)	4	4	Attach frames to mirror cell	*
6-046c	5/8-inch shims for one central cell	4	4	TSU	*
6-046d	3/8-16x1 Hex-hd cap screws (ss)	4	12	Attach 6-045 to pucks	*
6-046e	3/8x2 pins	1	3	Attach 6-038b to 6-045	*	3
6-050	3/8-in flat washer (stainless)	1	39	For 6-008,6-038a	*
6-051	3/8-in lock washer (stainless)	1	39	ditto	*
6-052	3/8-in jam nut (ss)	1	39	ditto	*
	MORE FOR HARD POINTS				…
6-053	5/16-18x1 skt hd cap screw (stainless)	4	12		*
6-054	Motor mount	1	3	Krebs	*			ast-06-p08
6-055	1/4-20x2 socket-head cap screw (ss)	4	12		*
6-056	Linear stepper motor	1	3	EAD LA23ECKJ-12; TSU	*	2
6-057	12-24x3/4 socket-head cap screw (SS)	4	12		*
6-058	no. 12 lock washer (stainless)	4	12	Krebs	*
6-059	Flexure mount	2	6	Krebs	*			ast-06-p08
6-060	1/4-20x0.75 socket-head cap screw (ss)	8	24	Krebs	*
6-061	Flexure	1	3	Krebs	*			ast-06-p08
6-062	Flexure stiffener	1	3	Krebs	*
6-063	1/4-40 jam nut (stainless?)	1	3	TSU	*
6-064	6-32x0.5 socket-head cap screw (ss)	6	18		*
6-065	no. 6 flat washer (stainless)	6	18		*
6-070	Collar (existing part)	1	36	Hold axial support levers in place	*
6-071	1/4-20x1.25 hex hd cap screw (stainless)	6	216	Attach 6-070 to mirror cell	*
6-071	Extension spring	1	3	Pull hard points together	*
6-072	Adapter for spring (1st type)	1	3		*		JAE
6-073	Adapter for spring (2nd type)	1	3		?
6-074	Screw to attach 2. Adapter to h-p unit	3	9		?
6-075	Axial lever handling jig, longer type	1	1	Make of wood	*		JAE
6-076	Axial lever handling jig, shorter type	1	1	Make of wood	*		JAE
6-077	Lateral-lever-handling tool	1	1		*		MEK	ast-06-p12
	MIRROR HOLD DOWNS			Supplied with mirror cell	**		surpl
6-080	Back plate	2	4		*			no drawings
6-081	Outer clamping plate	2	8		*
6-082	Right-angle mirror clamp	1	4		*
6-082	3/8-16x2.5 sckt-hd cap screw (ss)	4	16	Attach clamping plates to back plate	*
6-083	3/8-16x2 sckt-hd cap screw (ss)	2	8	Clamp outer plates to 6-082	*
6-090	Mirror alignment jig	4	4	Make of wood	*			ast-06-p10
	LATERAL HARD POINTS				**
6-100	Attachment (turnbuckle)	3	3	Existing part	*
6-101	Special lateral-support puck	2	2	Existing part	*
6-102	Cell attachment adapter, type 1	2	2	Existing part	*
6-103	Cell attachment adapter, type 2	1	1	Existing part	*
6-104	1/2x1/2x3/8-16 shoulder screw	2	6		*	6
					…
					…
	TOP-END STRUCTURE			238 pounds (excluding mirror cell)	**		ORNL	ast-07-a01
7-001	Foot (for top-end structure)	4	4	ORNL-Y12	*			ast-07-p01
7-002	Upright	4	4		*			ast-07-p02
7-003	Strut attachment	8	8		*			ast-07-p03
7-004	Top cylinder	1	1		*			ast-07-p04
7-005	Upper stiffener	1	1		*			ast-07-p05
7-006	Lower stiffener/ mirror - cell atchmnt	1	1		*			ast-07-p06
7-007	Upper stiffener (strut & baffle attchmnt)	2	2		*			ast-07-p04
7-008	Central cylinder	1	1		*			ast-07-p04
7-009	Lower ring (lower baffle attachment)	1	1		*			ast-07-p04
7-010	Upper strut (stainless)	4	4		*			ast-07-p03
7-011a	Lower strut (aluminum)	4	4		*			ast-07-p03
7-011b	Lower strut spacer	8	8	Stainless; D3/4x0.406 w/ D11/32 hole	*
7-012	1.5-in link (stainless)	8	8		*			ast-07-p03
7-013	Guy wire with turnbuckle (stainless)	4	4	Johnson Sail (JSI)	*			ast-07-p03
7-015	Central baffle	1	1		*			ast-07-p05
7-016	Lower baffle	1	1		*			ast-07-p05
7-017	Upper baffle	1	1		*			ast-07-p05
7-018a	3/8-16x1 cap screws(stainless steel)	16	16	To attach quadrapod to tube	*			ast-07-p05
7-018b	1x5x1/16-in aluminum shims	8	8	To orient top end	*		JAE
7-018c	1x5x1/8-in aluminum shims	8	8		*		JAE
7-018d	1x5x1/4-in aluminum shims	4	4		*		JAE
7-019a	5/16-24x1 cap screws(stainless steel)	4	4	To attach struts to links	*
7-019b	5/16-24x1.25 cap screws(stainless steel)	12	12	To attach struts to baffle	*
7-019c	5/16-24x2 cap screws(stainless steel)	12	12	To attach struts to quadrapod	*
7-019d	5/16-24 self - locking nut(stainless steel)	36	36	To attach struts	*
7-020	1.30-inch standoffs (shims)	8	8	Adjust pos of mirror for changed FL	*		MW
7-021	1/4-20 threaded tapered pins (stainless)	3	3	To guide mirror cell into quadrapod	*
7-022	1/4-20x1/2 sckt-hd cap screw (stainless)	12	12	To attach mirror cell to quadrapod	*
7-023a	Fitting (1.25-in) for vent hole in upright	4	4		*
7-023b	Clamp for 7-023a	2	8	JAE-plastic	*
7-023c	1/4-20x3/4 sckt-hd cap screw (stainless)	2	8	For 7-023b	*
7-024	1.25-inch x 2.5 ft hose for leg vent	4	4		*
7-025	Fitting (1.25-in) for plate in mirror cell	4	4		*
7-026	Nut for fitting 7-025	4	4		*
7-027	Cover plate for top of tube	4	4		*
7-028	10-32x3/4 button-hd hex-sckt screw (ss)	2	8	To attach 7-027	*
7-029a	Strap to secure 1.25-inch tubing to mirror cell	8	8		*
7-029b	1/4-20x1/2 button-hd, hex-sckt cap screw (ss)	4	4	To attach 7-029a	*
	SECONDARY MIRROR CELL			40 pounds, assembled	…		ORNL	ast-07-a02,a03,a04
7-030	Mirror-cell mounting flange	1	1	ORNL-Y12	**			ast-07-p12
7-031	Mirror-cell wall cylinder	1	1		*			ast-07-p12
7-032	Mirror-cell back plate	1	1		*			ast-07-p12
7-033	Motor attachment stiffener, type 1	3	3		*			ast-07-p13
7-034	Motor attachment stiffener, type 2	3	3		*			ast-07-p13
7-035	Hard-point-attachment thickener	6	6		*			ast-07-p13
7-036	Flexure attachment stiffener	3	3		*			ast-07-p13
7-037	Axial retainer/hard point	3	3		*			ast-07-p13
7-038	6-32x0.5 cap screw (stainless)	6	6	Attach 7-037 to cell	*
7-039	Mirror hanger	1	1	stainless steel (ORNL)	*			ast-07-p09,p10
7-040	Mirror hub	1	1	invar (ORNL)	*			ast-07-p11
7-041	1/4-20x3 socket head cap screws (ss)	6	6	stainless steel; attach 40 to 39	*
7-042	Mirror retaining ring	1	1	invar (ORNL)	*			ast-07-p11
7-043	6-32x0.5 cap screw (stainless)	6	6		*
7-044	Motor standoff	3	3		*		MEK	ast-07-p14
7-045	10-32x1 socket head cap screws (ss)	2	6	For motor standoff (use only 2 per stand)	*
7-046	Linear stepper motor (HSI 4644X-12)	6	6	Provided by TSU	*
7-047	0.25-in ball drilled for 4-40 press fit	6	6		*		TSU
7-048	6-32x0.375 cap screw (stainless)	12	12	Attach motors to cell	*
7-049	no. 6 lock washer (stainless)	12	12	ditto	*
7-050a	Flexure-lever holder (frame)	2	6		*		MEK	ast-07-p15
7-050b	Lever-base keeper	1	3		*		MW	ast-07-p18
7-050c	10-32x1/2 sckt-hd cap screw (stainless)	2	6	Attach 50b to 50a	*
7-051	Flexure lever	3	3		*		MEK	ast-07-p14
7-052	Lucas flexural pivots (1/8-inch: 5004-400)	2	6	Provided by TSU	*
7-054	10-32x5/8 sckt-hd cap screw (stainless)	4	12	Attach 7-050 to cell	*
7-055a	Link (for lateral positioning of mirror)	3	3	Assembly (TSU); see AST-07-P16	*		MEK	ast-07-p16
7-055b	Short cup for link (LH threads)	3	3		*		MEK
7-055c	Long cup for link (RH threads)	3	3		*		MEK
7-055d	8-32-1/4 nylon-tip set screw (to retain link)	3	3	Thor LabsSS8N025	*
7-056a	Link-tensioning spring (1/2x1.5x0.062)	3	3	Century Spring Corp C-033(?)	*
7-056b	Right-angle bracket	3	3	Attach spring to spider	*
7-056c	6-32x3/8 sckt-hd cap screw (ss)	3	3	Attach bracket to spider	*
7-056d	Wire link for spring	3	3	Attach spring to mirror cell	N/A
7-057	10-32x5/8 sckt-hd cap screw (stainless)	2	6	Attach 7-056 to cell	*
7-058	Limit-switch actuator	1	3		*		MW	ast-07-p18
7-059a	4-40x1/2 sckt-hd cap screw (ss)	2	6	Attach 7-058 to lever	*
7-059b	no. 4 flat washer	2	6	ditto	*
7-060	Spring retainer	6	6		*		MEK	ast-07-p14
7-061	Spring (Lee LC-059G-10)	6	6	2 in; 20.5 lb/in; 0.826 in solid	*
7-062	Spring adapter	6	6		*		MW	ast-07-p16
7-063		6	6
7-064	Tensioning link for hanger	3	3		*		MW	ast-07-p16
7-065	Tensioning link for flexure lever	3	3		*		MW	ast-07-p16
7-066	8-32 nut (stainless)	12	12	For tensioning links	*
7-067	no. 8 flat washer	6	6	ditto	*
7-068	no. 8 lock washer	6	6	ditto	*
7-069	Hard point/spacer (for axial motion)	3	3		*		MW
7-069a	4-40 set screw (stainless)	3	9	Secure 7-069	*
7-070	Axial-counterweight holder	2	2		*		MEK	ast-07-p15
7-071a	Axial-counterweight body	1	1		*		MEK	ast-07-p14
7-071b	Spacer for counterweight body	1	1		*		TSU	no drawings
7-072	Axial-counterweight shaft (1/4-20x4; ss)	1	1	TSU	*
7-073	Flexural Pivot (Lucas 5005-400)	2	2	Supplied by TSU	*
7-074a	Counterweight (2-lb of lead)	1	1		*		MEK	ast-07-p15
7-074b	Counterweight sleeve	2	2	1/4x3/8x3/8 drill bushing	*
7-075	10-32x0.5 socket head cap screws (ss)	4	4		*
7-076	1/4-inch flat washer	2	2	To adjust counterwt on shaft	*
7-077	1/4-inch lock washer	1	1	ditto	*
7-078	1/4-20 nuts (stainless)	2	2	ditto	*
7-079	Retainer	4	4		*		MEK	ast-07-p15
7-080	Axial Counterweight Attachment	1	1		*		MEK	ast-07-p11
7-081	Axial Counterweight Link	1	1		*		MW	ast-07-p16
7-082	8-32 nut (stainless)	1	1	To tension link	*
7-083	no. 8 flat washer (stainless)	1	1	ditto	*
7-084	no. 8 lock washer (stainless)	1	1	ditto	*
7-085	Lateral Counterweight Holder	1	1		*		MEK	ast-07-p17
7-086	Lateral Counterweight Body	1	1		*		MEK
7-087	Lateral counterweight shaft (1/4-20x4; ss)	1	1	TSU	*
7-088	Flexural Pivot (Lucas 5005-400)	2	2	Supplied by TSU	*
7-089a	Lateral Counterweight	1	1	identical to 7-074a	*		MEK
7-089b	Counterweight sleeve	2	2	1/4x3/8x3/8 drill bushing	*
7-090	10-32x0.5 socket-head cap screw (ss)	3	3	Attach 7-085 to cell	*
7-091	1/4-inch flat washer	2	2		*
7-092	1/4-inch lock washer	1	1		*
7-093	1/4-20 nut (stainless)	2	2		*
7-094	Lateral link	1	1	Attach mirror hanger to cw lever	*			ast-07-p19
7-094a	Crimp eyes	2	2	Small Parts MCEY-37	*
7-094b	Wire rope	1	1	Berg 3/64-in aircraft cable	*
7-094c	Turnbuckle	1	1	Des Eaton, built by Krebs	*		MEK
7-095	6-32x3/8 sckt-hd cap screw (ss)	2	2	Attach link to mirror hanger	*
7-096	10-32x0.2 set screw (stainless)	2	2		*
7-097	Seal for secondary mirror	1	1	1/6-inch rubber	N/A
7-098	Retainer for seal	1	1	Hose clamps?	N/A
7-099		2	2
7-100	Limit/zero switch	6	6		*
7-101	Switch adapter, no. 1 (for levers)	3	3		*		MEK
7-102	Switch adapter, no. 2 (axial)	3	3		*		MEK
7-103	4-40x1/2 sckt-hd cap screw (ss)	2	12	Attach switch adapters	*
7-104	4-40x3/8 set screw	1	6		*
	COVER FOR TOP END				*		JAE
7-110	Cap for top of quadrapod	1	1	Make from 0.05-in aluminum	*
7-110a	Wall	1	1		*
7-110b	Top	1	1		*
7-110c	Collar	1	1		*
7-111	10-32x1/2 button-hd hex-sckt screw (ss)	3	3	To attach 7-100	*
7-115	Protective cover for secondary mirror			Alum sheet; fit to finished cell	???
	MIRROR-LIFTING JIG						JAE
7-120	Standoff for lifting attachment	2	2	1x1-in alum bar	*
7-121	1/4-20x3/4 sckt-hd cap screw (ss)	2	2	Attach 7-120 to mirror cell	*
7-122	Cross piece	1	1	1/2-in alum plate	*
7-123	Lower horizontal extender	1	1	1x2-in alum bar	*
7-124	Vertical link	1	1	ditto	*
7-125	Upper horizontal link	1	1	ditto	*
7-126	3/8-16x1 sckt-hd cap screw	2	2	Attach 7-122 to 7-123	*
7-127	3/8-16x1.5 sckt-hd cap screw	4	4	Hold 7-123,124,&125 together	*
7-128	3/8-16 hook (lifting eye)	1	1		*
7-129	1/4-20x3/4 sckt-hd cap screw (ss)	2	2	Attach lifting jig to mirror cell	*
					…
					…
	AZIMUTH DRIVE WHEEL			1280 pounds	**		ORNL	ast-08-a01,a02
8-001	Base Plate (azimuth drive wheel)	1	1	ORNL Y-12	*			ast-09-p01
8-003	Drive cylinder (not used)	1	1		N/A
8-004	Wheel stiffener (not used)	18	18		N/A
8-005	1/2-13x2 cap screws (grade 8)	9	9	Torqued to 100 lb-ft	*
					…
					…
	ALTITUDE DRIVE SECTOR			243 pounds	**		ORNL	ast-09-a01
9-001	Inner Base Plate (altitude drive)	2	2	ORNL Y-12	*			ast-09-p03
9-002	Outer Base Plate	2	2		*			ast-09-p03
9-003	Altitude Drive Cylinder and Plate	1	1		*			ast-09-p02
9-004	(Vertical Plate)	1	1		N/A
9-005	(Vertical Stiffener)	8	8		N/A
9-006	3/8-16x? Socket-head cap screw	28	28	Attach feet to drive sector	*
9-007	5/16x2 steel pins	10	10	Pin feet to sector and mirror cell	*
9-009	3/8-16x2.5 hex-socket-head cap screw	28	28	Attach sector to mirror cell	*
9-010	Brace upper plate	1	2	ORNL Y-12	*			ast-09-p06
9-011	Brace lower plate	1	2		*			ast-09-p06
9-012	Brace strut	1	2		*			ast-09-p06
9-013	3/8-16x2.5 hex-head cap screw(stainless)	4	4	To attach struts to drive sector	*
9-014	3/8-16 nut for 9-010(stainless)	4	4		*
9-015	Flat washer for 9-010(stainless)	4	4		*
9-016	Lock washer for 9-010(stainless)	4	4		*
9-017	3/8-16x1.25 hex-head cap screw	8	8	To attach struts to mirror cell	*
9-018	Shim for feet of strut	2	2	4x4x3/8 aluminum	*
9-020	Tube counterweights (15.5 lbs each-appx.)	6	6	Make of 1/16-in lead sheets glued up	*		TSU
9-021	1/2-13x5 hex-head bolts (ss)	2	2	Attach counterweights	*
9-022	1/2-inch flat washers	2	2	Attach counterweights	*
9-023	1/2-in lock washers	2	2	Attach counterweights	*
9-024	1/2-13 nut (stainless)	2	2	Attach counterweights	*
	ALTITUDE BRAKE				**
9-030	Altitude Brake Striker(no.1)	2	2		*		ORNL	ast-07-p09
9-031	Rear Mount for Shock Absorber (no.1)	2	2		*		ORNL	ast-07-p08
9-032	Front Mount for Shock Asorber (no.1)	2	2		*		ORNL	ast-07-p08
9-033	Shock Absorber(Ace Contr A3/4x3-S)	4	4	Provided by TSU	*
9-034	1/2-13x2 socket-head cap screw	6	6		*
9-035	Nut for 1/2-13 bolt (stainless)	6	6		*
9-036	5/16-18x1.5 socket-head cap screw (ss)	8	8	Attach shock absorbers on tube	*
9-037	5/16-18x1.5 socket-head cap screw	8	8	Attach shock absorbers on sector	*
9-039	Nut for 5/16-18 screw	8	8	Inserts go in parts 9-0041/42	*
9-040	Altitude Brake Striker (no.2)	2	2		*			ast-09-p09
9-041	Rear Mount for Shock Absorber (no.2)	2	2		*		ORNL	ast-09-p08
9-042	Front Mount for Shock Absorber (no.2)	2	2		*		ORNL	ast-09-p08
9-043	3/8-16x2.5 socket-head cap screw	6	6		*
9-044	1/2-13x8 socket-head cap screw	2	2		*
9-045	1/2-13x5 socket-head cap screw	2	2		*
9-046	1/2-13 nut (stainless)	4	4		*
9-047	1/2-13x3 socket-head cap screw	4	4		*
9-048	1/2-13x1.5 socket-head cap screw	4	4		*
	ALTITUDE ZERO-POINT DETECTOR	1	1	See parts 1-120--1-134	**		MEK
9-050	Zero-point adapter	1	1	TSU	*
9-051	Spacer for zero-point adapter	1	1		*		MEK
9-052	1/4-20x1 hex-hd cap screw (stainless)	3	3	attach 9-050	*
	ALTITUDE LIMIT SWITCHES				…
9-060	Altitude limit switch	1	2	Grainger 2XC12 (Unimax 2HBA190-5)	*
9-061	Altitude-limit-switch adapter	1	2		*		MEK
9-062	6-32x1 socket-head cap screw (ss)	2	4	Attach limit switches to 9-061	*
9-063	no. 6 lock washer	2	4	ditto	*
9-064	no. 6 flat washer	2	4	ditto	*
9-065	1/4-20x1 socket-head cap screw (ss)	2	2	attach 9-061 to bump stand	*
9-066	1/4-inch flat washer (ss)	2	2	ditto	N/A
9-067	1/4-inch lock washer (ss)	2	2	ditto	N/A
9-068	Limit-switch bumper	2	2		*		MEK
9-069	8-32x3/4 socket-head cap screw (ss)	2	4	attach 9-068 to tilt sector	*
9-070	no. 8 flat washer	2	4	ditto	*
9-071	no. 8 lock washer	2	4	ditto	*
					…
					…
	AZIMUTH TRACTOR ATTACHMENT			49 pounds (each)	**		ORNL	ast-10-a01
10-001	Base Plate	1	2	ORNL-Y12	*			ast-10-p01
10-002	Upper Stiffener	2	4		*			ast-10-p02
10-003	Upper Attachment Plate	1	2		*			ast-10-p02
10-004	Lower Stiffener	2	4		*			ast-10-p02
10-005	Lower Block (flexure attachment)	1	2		*			ast-10-p02
10-001a	Shim	1	2	1/8-in aluminum plate; JAE	*
10-006	1/2-13x2.25 cap screws (stainless)	9	18	Attach 10-001 and 10-007	*
10-007	Safety-Clamp Attachment (no.1)	1	2		*			ast-10-p15
10-008	Cam Follower ( diameter = 1.5)	1	4	Bought by TSU	*	1
10-009	Azimuth-Drive Flexure	2	2		*			ast-10-p19
	AZIMUTH SLIDER/BRAKE ATTACHMENT			33 pounds (each)	**		ORNL	ast-10-a03
10-010	Base Plate	1	2	ORNL-12	*			ast-10-p03
10-011	Upright	1	2		*			ast-10-p03
10-012	Shelf	1	2		*			ast-10-p03
10-013	Stiffener	2	4		*			ast-10-p03
10-014	1/2-13x2.25 cap screws (stainless)	4	8	Attach 10-010 to fork (40 lb-ft)	*
10-015	3/8-16x2 hex-head cap screws	4	4	Attach 10-017	*
10-016	5/8- jam nut	various	10	For 10-008, 10-009, 10-026	*
10-017	Safety-Clamp Attachment (no.2)	1	2	See AST-10-P15	*			ast-10-p15
10-018	3/8-16x1.25 skt hd cap screw(stainless)	4	4	Attach 10-090?	*
10-019	5/8x1/8 stainless washer	2	6	For 10-009, 10-026	*
	ALTITUDE-DRIVE ATTACHMENT			40 pounds	**		ORNL	ast-10-a04
10-020	Base Plate	1	1	ORNL-Y12	*			ast-10-p04
10-021	Upright	2	2		*			ast-10-p04
10-022	Front Bumpier	1	1		*			ast-10-p04
10-023	Back stiffener	1	1		*			ast-10-p04
10-024	Top stiffener	1	1		*			ast-10-p04
10-025	Attachment Block	1	1	For altitude tractor/flexure	*			ast-10-p05
10-026	Flexure for altitude tractor	1	1		*			ast-10-p19
10-027	3/8-16x2 socket-head cap screw	20	20		*
10-028	3/8-16x3 socket-head cap screw	2	2		*
10-029	3/8-16x5 socket-head cap screw	2	2		*
10-030	3/8-16x6 socket-head cap screw	2	2		*
10-031	3/8-16x1.5 hex-hed cap screw	10	10		*
	DRIVE TRACTORS			130 pounds each, assembled	**		ORNL	ast-10-a07--a09
10-040	Top /Bottom Plate (tractor body)	2	8	ORNL Y-12	*			ast-10-p07
10-041	Drive - Cylinder Housing	2	8		*			ast-10-p08
10-042	Inner Left Side Plate	1	4		*			ast-10-p07
10-043	Outer Left Side Plate	1	4		*			ast-10-p07
10-044	Back Plate	1	4		*			ast-10-p07
10-045	Right Side Plate	1	4		*			ast-10-p07
10-046	Attachment Point	1	4		*			ast-10-p08
10-047	Pressure-Point Stiffeners	4	16		*			ast-10-p07
10-050	Drive-Cylinder (Roller)	2	8		*			ast-10-p12
10-051	Bearing	4	16	Prov. by TSU; Kaydon JU04XP4A	*	4
10-052	Motor-Mounting Flange	2	8		*			ast-10-p12
10-053	Motor (Compumotor Dynaserve DM1015B)	2	8	Provided by TSU	*	2
10-054	Motor-Mount Lower Plate	2	8		*			ast-10-p13
10-055	Motor-Mount Cylinder	2	8		*			ast-10-p13
10-056	Motor-Mount Upper Plate	2	8		*			ast-10-p13
10-057	Motor Base Mounting Plate(flexure)	2	8		*			ast-10-p14
10-058	Cover Plate	2	8		*			ast-10-p14
10-059	M6x20 socket-head cap screw (stainless)	6	48	Provided by TSU; to attach motors	*
	DRIVE CLAMP			50 pounds/set (1 set/tractor=4 frames)	**	1 set	ORNL	ast-10-a10
10-060	Clamp Body	4	16		*			ast-10-p09,p10
10-061	Clamp Extension Cylinder	4	32		*			ast-10-p11
10-062	Lower Stiffener	2	16		*			ast-10-p09,p10
10-063	Upper Stiffener	4	32		*			ast-10-p11
10-064	Roller (Camrol CCF-1.75-S or equiv.)	4	32	Provided by TSU	*	8
10-064a	Grease fitting for Camrol roller	4	32	Alemite 1728-B (Williams Lub. Serv.)	*	2
10-065	Roller Retainer (special nut)	4	32	ORNL Y-12	*	8		ast-10-p18
10-066	Clamp Back Plate	2	8		*			ast-10-p08
10-067	5/16-18x1 cap screws (stainless)	8	64	Provided by TSU	*
10-068	Clamp Retainer, 1st Type	12	36		*			ast-10-p18
10-068a	Shim for retainer, 1st type	4	12		*		JAE
10-069	Clamp Retainer, 2nd Type	2	8		*			ast-10-p18
10-069a	Shim for retainer, 2nd type	2	6		*		JAE
10-070	1x2.5-in press spring (Lee LHL1000B06)	4	32	288 lb/in; 266 lb @37% defl.; 1.5 in solid	*	10
10-071	Spring-holder body	4	32		*			ast-10-p17
10-072	Pressure plate	4	32		*			ast-10-p17
10-073	1/4 inch ball	4	32		*
10-074	1/2-20x1.75 socket - head cap screw	1	32	To tension clamps	*
10-075	1/2-20x5/16 jam nut (stainless)	1	32	ditto	*
10-076	1/2-in lock washer (stainless)	1	32	ditto	*
10-078	1/4-20x1.5 socket - head cap screw	14	112	To attach clamp retainers (10-068,69)	*
10-079	1/4-20x1/2 skt - hed cap screw	72	288	To attach 10-054,57,&58	*
10-080	1/4-20x3/8 skt - hed cap screw(stainless)	12	96	To attach 10-054&10-058 (front edge)	*
10-081	Lifting eye (1/4-20 eye)	2	6	To lift tractors with crane for attach.	*
10-082	M6x15 hex-head cap screw(stainless)	6	48	Attach flexures to motors	*
10-085	Azimuth-drive Hanger Plate	1	2		*			ast-10-p18
10-086	Drive-Lifting Sling	1	1	1/8-inch wire rope	*
10-087	Clamp for sling	2	2		*
10-088	Hook for sling	2	2		*
	SHUTTLE DRIVE				**		ORNL
10-090	Shuttle-drive base	1	1	ORNL Y-12	*			ast-10-p16
10-091	Shuttle-drive upright	1	1		*			ast-10-p16
10-093	Shuttle-puck base	1	1		*			ast-10-p16
10-094	Shuttle-puck upright	1	1		*			ast-10-p16
10-095	M12x25 hex hd cap screw (ss)	4	4	To attach 93+94 to shuttle	*
10-096	(duplicate of 1-090)	2	2		*			ast-10-p16
10-100	Bearing press (first type)	1	1		*			ast-10-p20
10-101	Bearing press (second type)	1	1		*
10-102	Alignment tool	1	1		*
10-104	Tractor-disassembly base	1	1	TSU-summer 2000?	??
10-105	Tractor-disassembly support	1	1	TSU-summer 2000?	??
10-106	Bearing dismounting cylinder	1	1	TSU-summer 2000?	??
10-107	Gear puller (3-leg commercial)	1	1		*
	AZIMUTH TRACTOR HANGER				**		Ham
10-110	Hanger mounting plate	1	2	Hamilton Machine	*			ast-10-p21
10-111	Hanger strut	1	2		*			ast-10-p21
10-112	Hanger spar	1	2		*			ast-10-p21
10-113	Spring cup	1	2	Krebs	*			ast-10-p22
10-114	3/4x1 spring (Lee LHL 750B 1 or equiv)	1	2	450 lb/in; 166 lb @37% defl.; 0.63in sol	*			ast-10-p22
10-115	Spring actuator	1	2	Krebs	*			ast-10-p22
10-116	3/8-16x2 sckt-hd cap screw (stainless)	1	2		*
10-117	1/4-20x0.75 sckt-hd cap screw (ss)	1	2		*
10-118	5/16-16x1 hex-hd cap screw (stainless)	4	8	To attach motor hanger to fork	*
	DRIVE-TRACTOR GUIDES				…
10-120	Tractor-guide body for altitude	2	2	Make of aluminum	*		MEK	ast-10-p24
10-121	Tractor-guide body for azimuth	2	4	ditto	*		MEK	ast-10-p25
10-122	Roller (Camrol CYR-3/4-S)	2	12		*	5
10-123	1/4-20x1.25 sckt-hd cap screw (ss)	2	12	Attach rollers to bodies	*
10-124	Spacers for rollers (D1/4x3/16 ss washers)	2	12	Travers Tool	*	4
10-126	1/4-20x1.5 sckt-hd cap screw (ss)	2	12	Attach guides to tractor bodies	*
10-127	Clearance sleeve for roller, altitude	2	2	To reduce clearance with tracks	*		MEK	ast-10-p24
10-128	Clearance sleeve for roller, azimuth	2	4		*		MEK
10-130	Counterwright holder for altitude, plate	2	2		*		JAE	ast-10-p28
10-313	Counterwright holder for altitude, hub	2	2		*		JAE	ast-10-p28
10-132	1/4-20x1 machine screw (ss)	3	6		*
10-133	1/2-13x24 threaded rod	1	2		*
10-134	1/2-13 nut	2	4		*
10-135	1/2-inch washer (stainless)	1	2		*
10-136	1/2-inch lock washer	1	2		*
10-137	5-lb counterweight	1	2	Use parts cut off axial support cw	*
10-138	1/4-20x1 sckt-hd cap screw (ss)	6	12		*
10-140	Tractor stiffener	1	3		*		JAE
10-141	1/4-20x3/4 sckt-hd cap screw (ss)	10	30	Attach stiffener to tractor	*
	REMAKE OF AZIMUTH TENSIONERS				**		JAE	ast-10-a12
10-150	Left frame	1	2		*			ast-10-p31
10-151	Right frame	1	2		*			ast-10-p31
10-152	Lower stringer	1	2		*			ast-10-p32
10-153	Upper stringer	1	2		*			ast-10-p32
10-154	Stay arm	1	2		*			ast-10-p33
10-155	Stay-arm stiffener	1	2		*			ast-10-p33
10-156	Bottom plate	1	2	Obsolete	N/A
10-157	Top brace (right hand)	1	2		*			ast-10-p34
10-158	Left-side shims, type 1	2	4	Make of 1/8x1 aluminum strap	*			ast-10-p30
10-159	Left-side shims, type 2	2	4	ditto	*			ast-10-p30
10-160	Right-side shims	2	4	ditto	*			ast-10-p30
10-161	3/8-16x1 sckt-hd cap screw (ss)	2	4	Attach 155 to 154 in back	*
10-162	3/8-16x1.5 sckt-hd cap screw (ss)	12	24	Most assembly	*
10-163	3/8-16x2 sckt-hd cap screw (ss)	7	14	Attach parts 10-154-156, etc	*
	REMAKE OF TILT TENSIONERS				**		JAE	ast-10-a13
10-170	Right-side plate	1	1		*			ast-10-p29,r14
10-171	Left-side plate	1	1		*			ast-10-p29
10-172	Foot for plate	1	2		*			ast-10-p30
10-173	Stringer for attach. spring holder (10-066)	2	4	(Must still mill some clearances)	*			ast-10-p30
10-174	Shim for foot	1	2		*			ast-10-p30
10-175	3/8-16x3.75 threaded rod (stainless)	2	2		*
10-176	Attachment point (1x2x3 aluminum)	2	2	Couple tensioners to internal plates	*			ast-10-p30
10-177	3/8-in flat washer	2	2		*
10-178	3/8-in lock washer	2	2		*
10-179	3/8-16 nut	2	2		*
10-180	3/8-16x2.75 sckt hd cap screws (ss)	4	8		*
10-181	1/4-20x1.5 flat-hd hex-sckt mach screw	15	30	Attach 10-172,173 to 10-170&171	*
10-182	1/2-13x2 sckt-hd cap screw	2	2	Attach 10-176 to fork	*
10-183	1/2-in flat washer (ss)	2	2		*
10-184	1/2-in split washer	2	2		*
					…
					…
	MIRROR LIFTING FIXTURE			170 pounds, plus attachments	**		Ham	ast-11-a01
11-001	Cylindrical upright (Lifting Fixture)	1	1	Hamilton Machine	*			ast-11-p01
11-002	Base Plate	1	1		*			ast-11-p02
11-003	Column	4	4		*			ast-11-p02
11-004	Stiffener	4	4		*			ast-11-p02
11-005	Frame Base Plate (Top-end fixture)	1	1	Hamilton Machine	*			ast-11-p03
11-006	Full - width Stiffener	2	2		*			ast-11-p03
11-007	Half - width Stiffener	4	4		*			ast-11-p03
11-008	Internal Web	2	2		*			ast-11-p03
11-009	External Web	8	8		*			ast-11-p03
11-010	Lifting eye	1	1		*
11-012	1-8x9 hex hd bolt (high strength)	1	1		*
11-013	1-8 nut (high strength)	1	1		*
11-014	1-in flat washer	2	2		*
11-015	5/8-11x24 threaded rod	4	4		*
11-016	5/8-in flat washer	8	8		*
11-017	5/8-11 nut	8	8		*
11-018a	Knob for threaded rod	4	4	To turn threaded rods	*
11-018b	1/4-20 set screw	4	4		*
11-019a	1/2-13x1.5 socket-head cap screw (ss)	2	2	To hold fixture in tube	*
11-019b	1/2-inch washer (stainless)	2	2	For 11-019a	*
	TOP-END FIXTURE				**		ORNL	ast-11-a02
11-021	Horizontal member	1	1		*			ast-11-p05
11-022	Cross member	2	2		*			ast-11-p05
11-023	Horizontal brace	4	4		*			ast-11-p05
11-024	Base Pad	4	4		*			ast-11-p05
11-025	Base plate for upper top-end jig	1	1		*
11-026	Arm for upper top-end jig	4	4		*
11-030	Fixture for secondary mirror cell	1	1	TSU	*
	SURROGATE PRIMARY MIRROR			Appx 3000-3100 pounds	**		Ham
11-040	Steel shell for surrogate mirror	1	1	Hamilton Machine	*
11-041	Concrete filling	1	1		*
11-042	Attachment points	8	8	8x1-inch channel	*
11-043	Support pucks	36	36	Wood discs	*
11-044	Hard-point pucks	3	3	Wood discs	*
11-045	Push points for outer lateral supports	2	2	Use surplus stainless material	*
11-046	3/8-in threaded rod and nuts for push/pulls	6	6		*
11-047	1/4-20x1 socket-hd cap screw	2	4	Attach 11-045	*
	SURROGATE SECONDARY MIRROR				**		JAE
11-048	40-lb steel slug	1	1		*
11-049	Mounting plate	1	1		*
	STAY BARS FOR ALTITUDE				**		ORNL	ast-11-a09
11-050	Base of lower attachment	1	1		*			ast-11-p06
11-051	Upright of lower attch.	2	2		*			ast-11-p06
11-052	Base of upper attch.	1	1		*			ast-11-p06
11-053	Upright of upper attch.	1	1		*			ast-11-p06
11-054	Stay bar for zd = 0	1	1	ORNL Y-12	*			ast-11-p07
11-055	Stay bar for zd = 75	1	1	ORNL Y-12	*			ast-11-p07
11-056a	Stay bar for zd = 90	1	1	ORNL Y-12	*			ast-11-p07
11-056b	Stay bar for zd=90 (2nd type)	1	1	TSU	*
11-057	1/2x2.0 detent pin (for stay bars)	2	2	Carr-Lane CL-8-2.00	*	2
11-058	1/2-13x1.25 cap screw for part 50	4	4		*
11-059	1/2-13x1.5 cap screw for part 52	2	2		*
11-060	Temporary Stay-Bar Attachment	2	2	Attach to top ring of cell (3-inch angle)	*
	PRIMARY MIRROR COVER				**		Ham	ast-11-a10
11-070	Outer Ring (Mirror Cover)	2	2	Hamilton Machine	*			ast-11-p09
11-071	Outer ring span (no.1)	4	4		*			ast-11-p09
11-072	Outer ring span (no.2)	2	2		*			ast-11-p09
11-073	Inner Ring	4	4		*			ast-11-p09
11-074	Inner - ring upright	8	8		*			ast-11-p09
11-075	Spoke (no.1)	4	4		*			ast-11-p09
11-076	Spoke (no.2)	4	4		*			ast-11-p09
11-077	Inner - ring stiffener	8	8		*			ast-11-p08
11-078	Outer-ring stiffener	4	4		*			ast-11-p08
11-079	Clasp-attachment stiffener	8	8		*			ast-11-p08
11-080	Clasp guide plate	2	2		*			ast-11-p08
11-081	Handle Stiffener	4	4		*			ast-11-p08
11-082	Inside collar	2	2		*			ast-11-p08
11-083	Top plate	2	2		*			ast-11-p08
11-084	Clasps (not shown)	4	4	Moore Industrial Hardware	*
11-085	Handle (Winco 26W164B80K)	4	4	Provided by TSU	*
11-086	1/4-20x1 socket-hd cap screw (stainless)	8	8	To attach handles to mirror coves	*
11-087	1/4-20 lock nut for 11 - 086 (stainless)	8	8		*
11-088	10-32x1/2 button-hd hex-sckt screw (ss)	4	16	screw for 11-084	*
11-089	10-32 lock nut for 11-088 (ss)	4	16		N/A
	STUFF FOR CONTROL SIMULATION				**			ast-11-a11
11-090	Cast concrete base (18.5x18.5x7)	2	2		*
11-091	Motor Base Plate	2	2		*			ast-11-p10
11-092	Compumotor Dynaserve DM1015B	2	2		*
11-093	Reaction Wheel Adapter	2	2		*			ast-11-p10
11-094	Reaction Wheel for Altitude	1	1		*			ast-11-p11
11-095	Reaction Wheel for Azimuth	1	1		*			ast-11-p11
11-096	0.5 - in threaded rod	8	8		*
11-097	1/2 - 13 nut	16	16		*
11-098	M6x25 hex - hd cap screws	12	12	for simulators	*
11-099	M6x25 socket - head cap screws	12	12	for simulators	*
11-100	3/8-16x2 hex - head cap screws	12	12	for simulators	*
	SHIPPING CRATES				**
11-110	Pallet/Box for base				*		JAE
11-110a	Top plate	1	1	4 sheets 5/8-inch plywood	*
11-110b	Beams	4	4	8 2x8's glued into pairs	*
11-110c	Bottom stringers	4	4	3 2x6's	*
11-110d	Guides	8	8	Surplus oak	*
11-111	Cover for box				**		JAE
11-111a	Side plate (full length)	2	2	1/4-inch plywood+1x3's	*
11-111b	Side plate (2-in short)	2	2	1/4-inch plywood+1x3's	*
11-111c	Top plate	1	1	1/4-inch plywood+1x3's	*
11-111d	Guide blocks	6	6	1x4x6 blocks	*
11-112	Cover for oil pad	3	3	Plywood	*		JAE
11-112a	Steel strap	3	3	Hold down pad cover	*
11-112b	1/4-20x2.5 hex-head cap screws	6	6	ditto	*
11-112c	1/4-in washer	6	6	ditto	*
11-113	Cover for azimuth drive ring	1	1	Metal strip held by strap	N/A
11-114	Locators for levelling feet	6	6		*
11-115	Box for base skirt	1	1		*		JAE
11-115a	Mounting fixtures	?	?		*
11-115b	Straps	?	?		*
11-120	Pallet for fork	1	1	Steel weldment from ORNL	**		ORNL
11-121	Cover for azimuth-bearing surface	4	4	Plywood; ORNL	*
11-122	Cover for slewing ring	1	1	Plywood; JAE	*
11-123	Straps	5	5		*
11-130	Pallet for mirror cell	1	1	Same design as 11-110	*		JAE
11-131	Cover for pillow block/altitude axle	2	2	Plywood; JAE	*
11-132	Cover for slewing-sector attachments	4	4	Plywood; JAE	*
11-033	Mounting feet for mirror cell	4	4	Designed	*
11-134	Attachments for stay bars	1	1	Designed	*
11-140	Pallet/Box for altitude drive ring	1	1	Use parts of drive-ring pallet fm ORNL	**		JAE
11-141	Cover for box	1	1	1/4-inch plywood	*
11-150	Pallet for top end	1	1		**		OR
11-151	Cover for top-end pallet	1	1	Use tarp	*
11-160	Box for drive tractors	1	1		**		JAE
11-161	Cover for pallet	1	1		*
11-170	Pallet for drive attachments	1	1		**		JAE
11-171	Cover for pallet	1	1		*
11-180	Pallet for oil pump	1	1	JAE	**		JAE
11-181	Cover for pallet	1	1	1/4-inch plywood+1x3's	*
11-190	Box for axial counterweights	1	1		**		JAE
11-190a	Dividing plates (to hold 12 units each)	2	2		*
11-190b	Cradles for weights	6	6		*
11-190c	Retainer for weights	6	6		*
11-195	Box for misc heavy parts	1	1		**		JAE
11-196	Box for drive electronics (cabinets)	1	1		**		JAE
	SURROGATE CRANE FOR TOP END			Used in Nashville only	**		JAE
11-200	Spar	2	2		*
11-201	Retainer	2	4		*
11-202	Stringer	1	1		*
11-203	Brace	2	2	Use surplus wood	*
11-204	Pulley	2	2		*
11-205	Winch	2	2	1 of two in hand	*
11-206	Rope	2	2		*
11-207	Nails & clamps	?	?	Attach brace (11-203)	*
	CART FOR DRIVE TRACTORS				**		JAE
11-230	Base plate	1	1	1/2-in plywood	*
11-231	Upright	2	2	3/4-in plywood	*
11-232	Top plate	1	1	1/2-in plywood	*
11-233	Horizontal frame	3	3	2x4x23.5	*
11-234	Horizontal stiffener	4	4	1/2-in plywood	*
11-235	Top bar	2	2	Surplus 4x4	*
11-236	Casters	4	4		*
11-237	No. 12 wood screws	16	16	Attach casters	*
	LIFT FOR AZIMUTH TRACTOR				**		JAE
11-250	Top bar	1	1	2x4	*
11-251	Upright	2	2	2x4	*
11-252	Base plate	2	2	2x4	*
11-253	Top brace	2	2	2x4	*
11-254	Base brace	2	2	2x4	*
11-255	Stringer	1	1	1x4	*
11-256	Winch and rope	1	1	Got from Lowes	*
11-257	3/8-16x4 carriage bolts	2	2	Attach winch	*
11-258	3/8-in flat washer	2	2	ditto	*
11-258	3/8-16 hex nut	2	2	ditto	*
					…
	BOX FOR DRIVE AMPLIFIERS			Hamilton machine	**		Ham	ast-12-a01,r01,r03
12-001	Long rails	4	4	3/4x3/4x1/8 alum angle	*			ast-12-p01
12-002	Side rails	4	4	ditto	*			ast-12-p01
12-003	Vertical rails	4	4	ditto	*			ast-12-p01
12-004	Long rails for door	2	2	3/4x3/4 alum box extrusion	*			ast-12-p01
12-005	Short rails for door	2	2	ditto	*			ast-12-p01
12-006	Mounting rails for drive amplifiers	2	2	1/8-in alum sheet	*			ast-12-p01
12-007	Top stiffener	2	2	ditto	*			ast-12-p02
12-008	Vertical corner stiffener	1	1	ditto	*			ast-12-p02
12-009	Vertical stiffener	3	3	ditto	*			ast-12-p02
12-010	Vertical side (attachment) stiffener	1	1	ditto	*			ast-12-p02
12-011	Horizontal corner stiffener	1	1	ditto	*			ast-12-p02
12-012	Horizontal stiffener	2	2	ditto	*			ast-12-p02
12-013	Back corner (attachment) stiffener	1	1	ditto	*			ast-12-p02
12-014	Door hinge (stainless piano hinge)	1	1	Small Parts PH-3-36	*
12-015	Top/bottom sheathing	2	2	0.05-in alum sheet	*		BP	ast-12-p03
12-016	Side sheathing	2	2	ditto	*		BP	ast-12-p03
12-017	Back/door sheathing	2	2	ditto	*		BP	ast-12-p03
12-018a	Air-filter adapter	2	2		*		JAE
12-018b	Air suction nipple (4-inch diameter)	2	2		*		JAE
12-019	Air filter	2	2	12x20x1 in (Home Depot)	*
12-020	Latch	3	3	Small parts LL-1	*	2
	BOX FOR COMPUTER				**		Ham	ast-12-a02,r02,r03
12-021	Long rails	2	2		*			ast-12-p01
12-022	Side (short) rails	1	1		*			ast-12-p01
12-023	Vertical rails	1	1		*			ast-12-p01
12-024	Long door rails	1	1		*			ast-12-p01
12-025	Vertical door rails	2	2		*			ast-12-p01
12-026	Top stiffener	2	2		*			ast-12-p02
12-027	Vertical corner stiffener	1	1		*			ast-12-p02
12-028	Vertical stiffener	2	2		*			ast-12-p02
12-029	Vertical side stiffener	1	1		*			ast-12-p02
12-030	Horizontal corner stiffener	1	1		*			ast-12-p02
12-031	Horizontal stiffener	2	2		*			ast-12-p02
12-032	Top attachment stiffener	2	2		*			ast-12-p02
12-033	Door hinge (stainless piano hinge)	1	1	Small Parts PH-3-36	*
12-034	Top/bottom sheathing	2	2		*			ast-12-p03
12-035	Side Sheathing	2	2		*			ast-12-p03
12-036	Back/door sheathing	2	2		*			ast-12-p03
12-037a	Filter adapter	1	1	Make of 1x1x1/16 square tubing	*		JAE
12-037b	Air suction nipple (4-inch diameter)	1	1		*		JAE
12-038	Air filter	2	2	14x25x1 in (Home Depot)	*
12-039	Latch	3	3	Small Parts LL-1	*
12-040a	Standoff for attaching box to fork	6	6	D2x3/4 cylinder with 3/8-16 axial thd	*		MEK
12-040b	Plastic standoff (1/4-inch)	2	2	Lift box farther off deck	*		JAE
12-041	3/8-16x2.75 threaded rod (ss)	6	6	For attaching boxes	*		JAE
12-042	3/8-in flat washer (stainless)	6	6		*
12-043	3/8-in lock washer (stainless)	6	6		*
12-044	3/8-16 nut (stainless)	6	6		*
12-045a	Side brace for amplifier box	1	1	Use wire rope and turnbuckle	*		JAE
12-045b	Side brace for computer box	1	1	Use wire rope and turnbuckle	*		JAE
12-046a	Upper link for side brace	2	2	1/8x1-in aluminum strap	*		JAE	no drawings
12-046b	Lower links for side brace	2	2	1/8x1.5-in aluminum strap	*		JAE	no drawings
12-046c	1/4-20x3/4 screws	3	3	Attach brace to box and fork	*
12-046d	1/4-20 lock nut (stainless)	1	1		*
12-046e	10-32x5/8 screws	2	2	Attach lower brace to computer box	*
12-046f	10-32 lock nut	2	2		*
12-047	Long security strap (for computer box)	1	1	82.5 inches	*
12-048	Short security strap (for amplifier box)	1	1	72 inches	*
12-049	Padlock	2	2		*	2
12-050	2-inch straight feedthrough (2 plastic)	3	3	For wires to drive motors	*
12-051	2-inch bent feedthrough	2	2		*
12-052	Nut to retain 2-inch feedthrough	5	5		*
12-053	Plastic protector for 2-in feedthrough	4	4		*
12-054	1.25-inch bent feedthrough	1	1	Power into computer box	*
12-055	Nut to retain -in feedthrough	1	1		*
12-056	Plastic protector for 1.25-in feedthrough	2	2		*
12-057	2.5-inch straight feedthrough (plastic)	2	2	Wires between two boxes	*
12-058	Nut to retain 2.5-inch feedthrough	2	2		*
12-059	2.5x18-in conduit (between boxes)	1	1	Bent to offset; cut for access	*		JAE
12-060	3/4-inch threaded straight feedthrough	1	1	For wire to GPS antenna	*
12-061	Not to retain 3/4-inch feedthrough	1	1	ditto	*
12-062	3/4-inch conduit with 90-deg bend	1	1	ditto	*
12-063	3/4-inch straight conduit (xx inches long)	1	1	ditto	*
12-064	threaded coupling for 3/4-in conduit	2	2	ditto	*
12-065	Threaded 3/4-inch conduit (xx inches long)	1	1	ditto	*
12-066	Cable clamps (1-in galvanized)	2	2	ditto	*
12-067	Standoff for conduit	1	1	ditto	*
12-067	1/4-20x1 hex-hd cap screws (ss)	2	2	ditto	*
	RACK FOR POWER SUPPLIES				**		JAE	No drawings
12-070	Uprights	10	10	3/4x3/4 alum box extrusion	*
12-071	Bottom front frame	1	1	3/4x3/4x1/16 alum angle	*
12-072	Bottom rear frame	1	1	3/4x3/8x1/16 alum angle	*
12-073	Bottom slide	4	4	1/2x1/2x1/8 alum angle	*
12-074	Side slides	8	8	3/4x3/8x1/16 alum channel	*
12-075	Top front frame	1	1	3/4x3/8x1/16 alum angle	*
12-076	Top back frame	1	1	0.05 alum sheet	*
12-077	Top side attachment frame	2	2	1x1x1/16 alum angle	*
12-078	1/8-inch pop rivets	50	50	Put rack together	*
12-078	3/16-inch pop rivets	4	4	Attach to computer box	*

					…
	CONTROL-SYSTEM HARDWARE
13-001	Telescope control computer	1	1	Andre Hedrick to recommend	??	?	0
13-002
13-003
13-004
13-005
13-006
13-007
13-008
13-009
13-010	Galil motion-control unit	1	1		*	2		ast-13-r08,ast-13-r18
13-011	Galil breakout board	2	2		*	1
13-012	Galil DIO breakout board	1	1		*	1
13-013	RS-232 cable for Galil controller	1	1		*	1
13-014	Power cord for Galil controller	1	1		*
13-015
13-016
13-017
13-018
13-019
13-020	Compumotor Dynaserve driver	6	6	Drives motors 10-053	*	2
13-021a	Power cord for amplifier	1	6		*
13-021b	Eye lugs for power cords	3	18		*
13-022	10-32x1/2 btn-hd, hex-sckt cap screw (ss)	2	12	Attach amplifiers to frame	*
13-023
13-024
13-025
13-026
13-027
13-028
13-029
13-030	GPS timing card	1	1	TWO SPARES needed	*	2		ast-13-a
13-031	GPS antenna	1	1	ditto	*	2
13-032	GPS antenna cable (coaxial)	1	1	ditto	*	2
13-033	9-pin D sub-min shell	1	1	Cable for timing outputs	*
13-034	Hood for connector	1	1		*
13-035	Pins for D-shell (solder cup)	4	4		*
13-036
13-037
13-038
13-039
	COMMUNICATIONS/IO
13-040	RS232-to-RS422/RS485 converter	1	1	Cyber Research CyMOD CM4520	*	1		ast-13-r03
13-041	CyMOD CM4053 (16 digital inputs)	2	2	Cyber Research CyMOD	*	1		ast-13-a
13-042	CyMOD CM4050 (7 dig inpts, 8 dig outpts)	2	2	Cyber Research CyMOD	*	4		ast-13-a
13-043	CyMOD CM4017 (6 diff analogue inputs)	1	1		*	1		ast-13-a
13-044	Belden 8162 2-TP shielded cable	1	1	Control cable for CyMOD units	*			ast-13-a
13-044	24VDC@1 amp power supply	1	1	RS485 communications (CM 243)	*	1		ast-13-a
13-045	5VDC@1 amp power supply	1	1	Activate inputs (Lambda LUS 8A 5)	*	1
13-046	17-inch DIN rail	?	?	To mount CyMOD units in box	*
13-047a	25-pin D-shell connectors (female)	2	2	For abs enc (AMP 207463-1)	*
13-047b	Sockets for D-shell (solder cup)	25	50	Allied 512-9530 (AMP66569-3)	*
13-048	Hood for 25-pin D-shell connector	1	2	For abs encoders All Elect. DB-25H	*
13-049
	LINEAR ACTUATORS (STEPPERS)				…
13-050	IMS IM483I Stepper driver	12	12	Ordered from Cyber Research	*	8		ast-13-r01,r02
13-051	Mounting plate for IMS stepper driver	12	12	Make of 1/8-in aluminum plate	*	8	E/P	ast-13-p01
13-052	Drill template for making mounting plates	1	1	Make of 3/8-in aluminum plate	*		MEK
13-053	mounting flange for 9-pin connector	1	20		*	8	E/K	ast-13-p01
13-054	Nylon standoff	4	80		*
13-055	6-32x3/4 sckt-hd cap screw (ss)	4	80		*
13-056	6-32x1/4 sckt-hd cap screw (ss)	2	40		*
13-057	34-pin dual in-line conn with ribon cable	20	20	DigiKey A1AXG-23436M-ND	*
13-058a	9-pin D-shell connector (male)	1	20	Allied 512-0105 (AMP205204-4)	*
13-058b	Pins for D-shell (solder cup)	9	180	Allied 512-9520 (AMP66570-8)	*
13-059a	9-pin D-shell connector (female)	1	20	Allied 512-0110 (AMP205203-3)	*
13-059b	Socket for D-shell (solder cup)	8	160	Allied 512-9530 (AMP66569-3)	*
13-060	Mounting screws for 9-pin connector	4	80	All Elect.	*
13-061	SPDT micro toggle switch w/ hardware	1	20	All Elect.	*
13-062	Crimp connector for ground line	1	20		*
13-063	8-32x1 standoffs (external thread)	4	24	For mounting controller units	*
13-064	8-32x1.5 standoffs (internal threads)	4	24		*
13-065	8-32x1/2 cap screws	4	24		*
13-066	9-pin D-shell connectors (male)	1	12	For motor leads (see 13-058)	*
13-067	Hood for 9-pin D-shell connector	1	12	All Elect. DB-9H	*
13-068	3/16-inch heat-shrink tubing	1	12	For motor leads (DigiKey)	*
13-069
13-070	Belden 8164 4-TP shielded cable	1	1	Control cable for stepper motors	*
13-071	9-pin D-shell connector (female)	12	12	Allied 512-0110 (AMP205203-3)	*
13-072	Hood for 9-pin D-shell connector	12	12	All Elect. DB-9H	*
13-073	24VDC@3amp power supply (for steppers)	1	1	Cyber research CM 243 (=13-044)	*	1
13-074	5VDC@1amp power supply (for limits)	1	1	See 13-045	*	1
13-075
13-076
13-077
13-078
13-079
	POWER/SIGNAL DISTRIBUTION				**			ast-13-a03
13-080	12AWG stranded power lead (25 ft)	4	4	Home Depot (Cable Wrap)	*
13-081	Spade terminations for power leads	3	12		*
13-082	2-plug power box (for drive amplifiers)	3	3	Home Depot	*
13-083	Face plate for 2-plug box	3	3	Home Depot	*
13-084	4-plug power box (for computer box)	1	1	Home Depot	*
13-085	Face plate for 4-plug box	1	1	Home Depot	*
13-086	Cable clamps for plug boxes	4	4	Home Depot	*
13-087	3/16-in pop rivets	4	16	Attach plug boxes to enclosures	*
13-088	Retaining clamps	3	3	Attach wires inside enclosures	*
13-089	10-32x1/2 button-hd, hex-sckt screw (ss)	3	3	ditto	*
13-090


13-100	Ground wire (no. xx stranded copper)	1	1
	EMERGENCY-STOP BUTTON
13-110	Panic button	2	2	Telemecanique XAL J174 (Grainger)	*
13-111	Switch for 13-110 (normally open)	2	2	Telemecanique XEN L1111	*
13-112	Mount for panic button	2	2	Use surplus plastic	*
13-113	8-32x1/2 sckt-hd cap screw (ss)	2	4	Mount panic button to base	*
13-114	10-32x5/8 sckt-hd cap screw (ss)	2	4	Mount base to telescope	*
13-114	Wire for panic button	1	1	24AWG TP	*
13-114

Last Updated on 6/28/00
By eaton